Kontrol S61 MK3 firmware issue
Hi All
Tried to update firmware for Kontrol S61 and it did not work, .
see below screen shots.
now the keyboard wont even start.
what am I to do ?
thanks
Jason
Best Answer
Answers
-
Your keyboard may be 'bricked' already check following page first ! , ref. : Kontrol S-Series MK3: Troubleshooting Firmware Update Issues : https://support.native-instruments.com/hc/en-us/articles/14229160390045-Kontrol-S-Series-MK3-Troubleshooting-Firmware-Update-Issues
As for the power cycling then : Power cycle the keyboard 5 times. At the 5th time, the recovery screen should appear and you can re-update the controller. In order to power cycle, turn on the device, wait 2-3 seconds and then turn it off again. Please repeat this 5 times.
If that doesn't change things then your keyboard may be 'bricked' because of a failed update of the firmware and you will have to contact place of purchase or N.I. support to ask to have your keyboard swapped for a new one ! Don't worry , N.I. will help you and your investment is safe ! Despite how ever annoying the whole thing is then there is that at least !
Generally then it appears that not only does the keyboards with the shipped firmware and initial FW update software had several problems with USB C drivers and chips sets (why the use of a self powered USB-C hub is suggested) but also it appears as if the keyboard needs a USB-C power supply capable of USB-C PD attached to the keyboard power port when updating firmware !
0 -
Consistently feels like they rushed the MK3 Keyboard out. I feel bad for the devs because, after working for tech companies myself, I know that the decision to rush product out always is comes from the top.
0 -
Agree , but I am just another user here and I don't work here despite it often feels that way , I mean me spending far too much of my time trying to help people here while not being on N.I. payroll 😁..
1 -
I would like to clarify some well intentioned but slightly incorrect statements in this thread.
There are known issues affecting USB-C peripherals, specific to certain computers.
The issue most commonly manifests as an intermittent connection, at random and with no reliable repro.
It may happen a user 100 times in a row, and then 1 every 1000 times, it is entirely random.
If it occurs, the symptoms would of course vary depending on the peripheral.
For instance, a USB-C display, when used with one such specific computer, might blink or flash, update sluggishly, or freeze. A USB-C hard drive might disconnect randomly, or fail to sync or load.
For a hardware device that relies on USB-C for everything, such as our keyboard, you might experience it disconnecting from the the plug-in, or the firmware updater, which could cause firmware updates to fail, or data to stop transferring, resulting in the plug-in integration freezing or not working correctly.
It is incredibly frustrating. To users who blame the peripherals, and to manufacturers of USB-C peripherals bound by confidentiality and with no ability to take further action other than recommend workarounds. The manufacturers of certain computers are aware, and in more recent models, have revised the issue. That leaves quite a number of potentially affected computers in-market. Please note that I am not referring to any one specific model or company, and nor am I at liberty to clarify further. The workarounds have been advised across the board.
In those instances, one such workaround that has proved to be consistently reliable is to use a USB-C hub, which bypasses some problematic communication protocols and resolves the issue. As such, it is often our first recommendation when a user reports a failed firmware update, or a failure to consistently connect to the user experience we've built.
This then comes with another consideration. Whilst USB-C is perfectly capable of sending data and power down a single cable, some USB-C hubs are not. The user must make sure the outlet on the hub supports both data and power (they are usually labelled).
If you use an S88, which has higher power draw, you also need a USB-C power supply in addition to the data connection.
If you use an S49 or S61, and are plugging your USB-C cable or USB-C hub into a USB-A input on the computer, USB-A cannot provide adequate power and therefore must also use an additional USB-C power supply.
I hope that helps explain what might possibly be happening, or has happened, to you, but also why the problems "with USB C drivers and chips sets" @PoorFellow mentioned are not the fault of ours, nor within our power to resolve.
4 -
Thank you very much for the incredibly detailed explanation. And I apologize if stepping on your toes and if not being good enough of conveying the things expressed by you above which I believe are 100% correct.
My short form for me really just encapsulates that seen from a user point of view then the keyboards have been shipped with firmware and initial FW update software that had several problems with USB C drivers and chips sets and where it for N.I. of course matters a great deal to clarify where the blame lies then for the user the firmware still shipped with problems even if not N.I.'s fault that other companies make products that does not live up to specifications. But , I am very sorry , you are right I ought to at least tried to explain a little. Part of the problem doing that is that I don't know even half of what you do and also do I not have your eloquence of expressing myself with respect to technical matters and especially not in English ! .
But while I think you very likeable and same goes for the way that you generally handle things , including here (thank you so much), then I still think that N.I. could have saved themselves at least some troubles if N.I. had shipped the keyboards with an USB-C power supply (at least with respect to the S88).. Also , and I write this being kind , I think that other people will point out that maybe N.I. ought to have performed more tests in the wild, after all incompatibility and lack of keeping specifications is not exactly a new phenomenon , especially not on PC platform !
Anyway , I may be clumsy in expressing myself sometimes , and I may even forget to properly convey the essence of what you wrote above in my communication with other people but I for one absolutely believe you to be the skilled professional that you are and am equally willing to believe that N.I. have manufactured to specifications here where others have failed to manufacture to specifications.
So , my most sincere apology if stepping on your toes and for not being accurate in the sense of being more clear about some things in my posts above !
Thank you for your time
Best regards
0 -
@PoorFellow absolutely no apology needed whatsoever. You continue to be a wonderful contributor here, and I have really appreciated the way you've been able to deliver constructive and critical feedback, as well as help your fellow users out.
In this case - without the information I just provided, you also had no way to know. Again, no need to apologize for trying to help.
1 -
Hi everyone.
I need help. I updated my s61 mk3 to the new firmware, but now Komplete kontrol and Kontakt 7 dosent show up on my screen, when using logic i can only use daw mode on keyboard. In standalone now its just a plain midi keyboard. Any adivce?
0 -
Hi. This is a super old thread, going back to November 2023.
I would recommend opening a new thread here and give us some details so that we can actually help you:
- Mac or PC, and what version of OS? And don't just say "Sonoma" or "Windows"; give us the actual version number please. (I know you're on Mac, but for others reading this, we need to know more)
- What type of hardware? (For example, 2021 Macbook Pro with M1 chip, or HP laptop with an i5 processor, etcetera)
- What version of Native Access, Kontakt 7, and Komplete Kontrol? Don't just say "2" or "3". We need you to do Help/About, and give us the actual version number that appears there.
- What version is the firmware you have installed to your KK MK3 keyboard? You can get this from Native Access.
- What is the version of DAW (in your case, Logic)? Again, Help/About is needed.
- Please describe the cabling you have going from the computer to the MK3. USB-A to USB-C, or C to C? Is there a hub in there somewhere?
- What (in detail) is the problem? You say "doesn't show up on my screen", but I don't have any idea what that means. So please tell us in detail what you see/don't see and when you see or don't see it.
That's a start. Let's see what you're dealing with, and maybe somebody here can help you.
1 -
Make sure you've updated to the latest versions of NI Hardware Connection Service, KK 3.3.2 and K 7.10.6
0 -
Thanks. I'll give that a try…
0 -
Hi again. Thanks for your advice. I installed kk 3.3.2 and everything seems to be working.. But i installed
k 7.10.6 . In standalone it works fine, but is still doesn't show up in logic?
0 -
Hi there. I'm using a mac studio m1 max using sonoma 14.6.1. I've just installed k 7.10.6 and on my s61 mk3 i updated firmware to 1.7.6. My daw is logic pro x 11.0 , my connection from s61 is usb-A, although i've tried usbc-C with the same result. The problem i have is that when i load kontakt 7 in logic. it has not been recognised, and i can only use daw button on my s61. But in standalone everything seems to work fine. Im not technically minded. i just use youtube to try find a solution.
0 -
Hi again and thanks for the additional detail. I haven't installed KK on my Mac yet, so we're already beyond my ability to help you. Since it has been a few days (plus it's the weekend and everybody will probably come back on Monday), I'll tag a few folks just in case they have ideas.
@mykejb @DunedinDragon @PoorFellow
Good luck, OP! One of these days soon, I'll install all my stuff on Mac and yep, I may find myself in your situation. 😉
0 -
If the below here suggested does not help then please open a new thread on the Logic Pro Kontakt 7 issue as already suggested by BIF :
Remove, disable or rescan macOS AudioUnits plug-ins in Logic Pro for Mac or MainStage
0
Categories
- All Categories
- 19 Welcome
- 1.4K Hangout
- 60 NI News
- 735 Tech Talks
- 3.9K Native Access
- 15.8K Komplete
- 1.9K Komplete General
- 4.1K Komplete Kontrol
- 5.5K Kontakt
- 1.5K Reaktor
- 364 Battery 4
- 816 Guitar Rig & FX
- 416 Massive X & Synths
- 1.2K Other Software & Hardware
- 5.5K Maschine
- 7K Traktor
- 7K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators