TP4, HW Connection and Routing? (xone+vinyl)

gabomayz

Hello guys,

I'm pretty new to this hybrid or pure midi set up?

How do Connect all of these together, what do I need to buy, etc etc. I'd really appreciate the help.

I don't think I wanna mix vinyls just yet but id be great if they were all connected to the same speakers. if were to listen to my vinyls I’d have to disconnect the speakers from the K2 and into the record player

PS: i am planning to get a xone96 for mixing, for now i'm playing around with the K2 as a mixer

Uwe303

Hello,

there are several options, first a simple line switch like the Nobsound Little Bear MC1022 Mini, second line/phono mixer/monitor controller, this for example:

https://www.behringer.com/product.html?modelCode=0843-AAC

an audio interface with a phono preamp, but they are very rare these days, so maybe two devices a preamp and an audio interface. It also depends on what you want to do. Then of course a mixer like you mentioned is for a DVS setup, where you can use normal vinyl or time code vinyls as you like it.

Uwe303

Hello,

there are several options, first a simple line switch like the Nobsound Little Bear MC1022 Mini, second line/phono mixer/monitor controller, this for example:

https://www.behringer.com/product.html?modelCode=0843-AAC

an audio interface with a phono preamp, but they are very rare these days, so maybe two devices a preamp and an audio interface. It also depends on what you want to do. Then of course a mixer like you mentioned is for a DVS setup, where you can use normal vinyl or time code vinyls as you like it.

Scott Frost

buy a small 2 channel rotary mixer or even a used djm350, hook the output of the k2 into it and you can use both at the same time.