X1MK3: Browser View And Performance MOD (qml coding)

11213151718

Comments

  • Pozzetti
    Pozzetti Member Posts: 24 Member
  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,816 mod

    Update:

    Setup screens for custom settings are working. Some finetuning and you have something to test.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,816 mod

    UPDATE: PerformanceMod 3 for TP 4.1.1 (BETA4)

    What the post above (and the picture) says,

    … plus screen feedback!

    Test away. 🦋

    Also, a big thank you to everbody supporting my work. ☕

  • ritsaert
    ritsaert Member Posts: 3 Member

    Thanx for all the work so far.

    I've tried the Mod and it works very well.

    Three questions:

    • In Browse Mode> Shift Loop Encoder: how do i start a track after selecting it? (Can't figure it out myself)
    • Loop Encoder: Wouldn't it be more logical to activate loop Mode with Shift + (push) Loop Encoder? Now it is Shift + (push) Browse Encoder.
    • Is there a way to lose Mixer Mode on the X1MK3? Maybe i've missed some information, but i can't find anything about it. (I'm using for mixing).

    Thanx!

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,816 mod
    edited December 9

    @ritsaert :

    In Browse Mode> Shift Loop Encoder: how do i start a track after selecting it? (Can't figure it out myself)

    • Left Loop Encoder: Navigate Tree (1 step at a time) and Open/Close Node (Push).
    • SHIFT + Left Loop Encoder: Navigate Tree (10 steps at a time) and Open/Close Node (Push).
    • Right Loop Encoder: Load Preview Player (Push) + Seek Preview Player.
    • SHIFT+Right Loop Encoder: cycle through favourites or jump to preperation list (Push).
    1. Loading a track to the preview player out starts the preview player.
    2. After loading a track to a deck (by pressing the browse encoder), you have to start the track manually with the PLAY button.

    Loop Encoder: Wouldn't it be more logical to activate loop Mode with Shift + (push) Loop Encoder? Now it is Shift + (push) Browse Encoder.

    I recreated the encoder functions of the MoveEncoder/LoopEncoder combo of the S4. There (as well as factory X1Mk3), the SHIFT+Loop Encoder controls KEY and KEYLOCK.

    Is there a way to lose Mixer Mode on the X1MK3? Maybe i've missed some information, but i can't find anything about it. (I'm using for mixing).

    Button 4 toggle on the left side in setup mode (Block MIXER Overlay).

    The instructions on page 1 of this thread are somewhat long, but please take the time to read them (although i have to update them for the new setup functions when the beta is stable enough to post it).

  • ritsaert
    ritsaert Member Posts: 3 Member

    Thanx for your patience and kind reply. I had some things messed up with all the info available.

  • ritsaert
    ritsaert Member Posts: 3 Member

    I guess there must be somebody who has already thought on connecting the A/B-C/D selector (Mode switch) of Z1MK2 to X1MK3 so that when you select a channel on the Z1 the X1 automatically switches (to the transport functionality) of the same deck?

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,816 mod

    If both have the same types of combinations (haven't checked in detail), it would be the matter of having both of them react when a global variable gets triggered by the other one (like one of the MIDI buttons for example). I don't own a Z1Mk2 so i am not going to start coding on this until i buy one or someone decides this is so important that they send me one. 😋

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,816 mod
    edited December 11

    UPDATE: PerformanceMod 4 for TP 4.1.1 (BETA5)

    All custom settings can be accessed in the Setup Overlay of the X1 controller. When you start it up or enter setup later by holding MODE for 1 second, you have the following control toggles:

    Link FX Overlay to Decks means, if you have Deck A + B, you also have FX 1 + 2 (extrapolate to other combinations).

    New: Xone:92 MidLo Equalizer and Kill button added (SHIFT+Knob/Button 2) to the Mixer overlay if the corresponding setup toggle is activated. Mixer EQ type still has to be set to Xone manually in Preferences.

    All screen feedback for setup finished. Please test.

    Also STEM support is ready!

    How to use?

    • Enter Mixer Overlay.
    • Press SHIFT+Button 4 (the button used for CUE Monitor). If the deck is a STEM deck, you now have FILTER knobs and MUTE buttons! Press SHIFT+Button 4 to deactivate.

    Screen support for STEM controls yet to be done, but hey! Enjoy. 🙃

  • pixel
    pixel Member Posts: 232 Advisor

    Very good job, with the menu is well done.🤗
    I'll test all of this.😋

    Thank you very much for sharing your great work with us here☺️

  • el_dink
    el_dink Member Posts: 2 Newcomer

    Been playing with it for the last hour, great work man!

  • el_dink
    el_dink Member Posts: 2 Newcomer

    is there a way to change the tempo scroller to be, push for +-.01, regular to be +-1

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,816 mod

    There are 8 unused knobs in the setup menu. I could make two of them specify the bpm change for normal and pushed-down use (0.01 to 1.00 range. Good idea. :)

  • Pozzetti
    Pozzetti Member Posts: 24 Member

    Thanks for the updates man, looking forward to testing it out, I already have STEMS mapped as you know in a way that works for now, I've got a gig Saturday night so I'll hold off updating again until after then.

    Thanks again

  • mhollers
    mhollers Member Posts: 20 Member

    Hi, Is it possible to override anything on this amazing mapping? I'd like to map the 4 knobs to the xone 4 band EQ on the mixer overlay as I use an external mixer and have the mixer effects mapped to an F1. I'm familiar with mapping from scratch but if I add onto yours it overrides across all 'pages' (ie the effects pages, not just the mixer page)

    Is there a way to override just this page?

    thanks

Back To Top