KOMPLETE KONTROL can't load in Logic Pro X

Hi all!

I get an error message when I try to open Komplete Kontrol in Logic Pro X.

It says something like "An Audio Unit plug-in reported a problem which might cause the system to become unstable. Please quit and restart Logic Pro."

Skärmavbild 2023-09-12 kl. 15.07.05.png

And I get the option to Quit Logic or Recover.

Before this I got a black square that said Komplete Kontrol but there were no parameters/info or anything.

I've just switched Mac from Imac 2017 to Mac Mini M2 Pro.

I've tried giving full disk access and also deleted some plist files etc.

Any ideas?

Thanks for reading,

Dan

I did a rescan and this is the (crash?)report:

"validating Audio Unit Komplete Kontrol by Native Instruments:

AU Validation Tool

Version: 1.10.0

Copyright 2003-2019, Apple Inc. All Rights Reserved.

Specify -h (-help) for command options

--------------------------------------------------

VALIDATING AUDIO UNIT: 'aumu' - 'NiKK' - '-NI-'

--------------------------------------------------

Manufacturer String: Native Instruments

AudioUnit Name: Komplete Kontrol

Component Version: 2.9.4 (0x20904)

* * PASS

--------------------------------------------------

TESTING OPEN TIMES:

COLD:

Time to open AudioUnit: 299.495 ms

WARM:

Time to open AudioUnit: 121.756 ms

This AudioUnit is a version 2 implementation.

FIRST TIME:

Time for initialization: 0.029 ms

* * PASS

--------------------------------------------------

VERIFYING DEFAULT SCOPE FORMATS:

Input Scope Bus Configuration:

Default Bus Count:0

Output Scope Bus Configuration:

Default Bus Count:16

Format Bus 0: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 1: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 2: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 3: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 4: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 5: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 6: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 7: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 8: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 9: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 10: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 11: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 12: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 13: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 14: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Format Bus 15: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Bus 0, Has Channel Layouts: 0x650002

Default Layout (bus 0):

Tag=0x650002, Num Chan Descs=0

Bus 1, Has Channel Layouts: 0x650002

Default Layout (bus 1):

Tag=0x650002, Num Chan Descs=0

Bus 2, Has Channel Layouts: 0x650002

Default Layout (bus 2):

Tag=0x650002, Num Chan Descs=0

Bus 3, Has Channel Layouts: 0x650002

Default Layout (bus 3):

Tag=0x650002, Num Chan Descs=0

Bus 4, Has Channel Layouts: 0x650002

Default Layout (bus 4):

Tag=0x650002, Num Chan Descs=0

Bus 5, Has Channel Layouts: 0x650002

Default Layout (bus 5):

Tag=0x650002, Num Chan Descs=0

Bus 6, Has Channel Layouts: 0x650002

Default Layout (bus 6):

Tag=0x650002, Num Chan Descs=0

Bus 7, Has Channel Layouts: 0x650002

Default Layout (bus 7):

Tag=0x650002, Num Chan Descs=0

Bus 8, Has Channel Layouts: 0x650002

Default Layout (bus 8):

Tag=0x650002, Num Chan Descs=0

Bus 9, Has Channel Layouts: 0x650002

Default Layout (bus 9):

Tag=0x650002, Num Chan Descs=0

Bus 10, Has Channel Layouts: 0x650002

Default Layout (bus 10):

Tag=0x650002, Num Chan Descs=0

Bus 11, Has Channel Layouts: 0x650002

Default Layout (bus 11):

Tag=0x650002, Num Chan Descs=0

Bus 12, Has Channel Layouts: 0x650002

Default Layout (bus 12):

Tag=0x650002, Num Chan Descs=0

Bus 13, Has Channel Layouts: 0x650002

Default Layout (bus 13):

Tag=0x650002, Num Chan Descs=0

Bus 14, Has Channel Layouts: 0x650002

Default Layout (bus 14):

Tag=0x650002, Num Chan Descs=0

Bus 15, Has Channel Layouts: 0x650002

Default Layout (bus 15):

Tag=0x650002, Num Chan Descs=0

* * PASS

--------------------------------------------------

VERIFYING REQUIRED PROPERTIES:

* * PASS

--------------------------------------------------

VERIFYING RECOMMENDED PROPERTIES:

VERIFYING PROPERTY: Latency

PASS

* * PASS

--------------------------------------------------

VERIFYING OPTIONAL PROPERTIES:

* * PASS

--------------------------------------------------

VERIFYING SPECIAL PROPERTIES:

VERIFYING CUSTOM UI

Cocoa Views Available: 1

NIKompleteKontrolAUCocoaViewFactory

PASS

VERIFYING CLASS INFO

PASS

TESTING HOST CALLBACKS

PASS

* * PASS

--------------------------------------------------

PUBLISHED PARAMETER INFO:

# # # 1195 Global Scope Parameters:

WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set

WARNING: retrievedValue = 0.000000 (was 1.000000), Parameter did not retain maximum value when set

* * PASS

--------------------------------------------------

FORMAT TESTS:

Reported Channel Capabilities (explicit):

[0, 2] [0, 32]

No Input, Output Chans:

0-1 0-2 0-4 0-5 0-6 0-7 0-8

X

WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:1

WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:4

WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:5

WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:6

WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:7

WARNING: Can Initialize Unit to un-supported num channels:InputChan:0, OutputChan:8

# # AudioChannelLayouts (1), Output Scope:

ChannelLayout is Writable: T

The Unit publishes the following Channel Layouts:

0x650002,

Is Audio Channel Layout Available:

Mono Stereo Binau. AU_4 Ambi. AU_5 AU_5_0 AU_6 AU_6_0 AU_7_0 AU_7_0F AU_8 AU_5_1 AU_6_1 AU_7_1 AU_7_1F

X

Current Format:AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Current Format Tag = 0x650002, New Format Tag = 0x650002, Successsful

* * PASS

--------------------------------------------------

RENDER TESTS:

Output Format: AudioStreamBasicDescription: 2 ch, 44100 Hz, Float32, deinterleaved

Render Test at 512 frames

Slicing Render Test at 64 frames

PASS

Render Test at 64 frames, sample rate: 22050 Hz

Render Test at 137 frames, sample rate: 96000 Hz

Render Test at 4096 frames, sample rate: 48000 Hz

Render Test at 4096 frames, sample rate: 192000 Hz

Render Test at 4096 frames, sample rate: 11025 Hz

Render Test at 512 frames, sample rate: 44100 Hz

PASS

Bad Max Frames - Render should fail

PASS

Checking parameter setting

Using AudioUnitSetParameter

Using AudioUnitScheduleParameter

PASS

Test MIDI

PASS

* * PASS

--------------------------------------------------

Subscriber::receive(): Shutdown was requested

Subscriber::receive(): Shutdown was requested

AU VALIDATION SUCCEEDED.

--------------------------------------------------

validation result: successfully validated

updating properties of AU Komplete Kontrol by Native Instruments…"

Find more posts tagged with

Accepted answers

All comments

https://community.native-instruments.com/discussion/comment/95692#Comment_95692

Very annoying.

My aim is to only use Komplete for sounds and Izotope for plug-ins/mixing etc to keep it simple and try to get a grip on those.

Then it’s no good if Komplete is not Kompletely working.

Thanks for all the info though.

https://community.native-instruments.com/discussion/comment/95692#Comment_95692

I tried this, installing the old Native Access and it seems like some of the ones that previously opened as demo versions now were full versions.

The problem though is that almost no sounds open in Komplete Kontrol.

Is it better to let guitar Rig 5 go and have the new native access and does that work better for Komplete Kontrol?

Thanks

(This is the message I get for almost all sounds in KK)

Skärmavbild 2023-09-20 kl. 23.02.22.png

https://community.native-instruments.com/discussion/comment/95875#Comment_95875

Do you have the VST3 version Kontakt installed? Is is needed even in Logic

Quick links

Unanswered questions