Komplete Kontrol S88 and yamaha FC3a pedal

JPSW
JPSW Member Posts: 4 Member
edited October 22 in Komplete Kontrol

Help ! I have a komplete kontrol S88 Mk2 and have been gong crazy trying to set up a yamaha FC3a pedal .. all it seem to do is make continuous sustain with any setting .

any ideas how to set it up as a half damper pedal ? .. the set up below doesn't work ..

https://support.native-instruments.com/hc/en-us/articles/115005166305-How-to-Configure-Sustain-Expression-Pedals-on-a-KOMPLETE-KONTROL-Keyboard


See picture

Komplete Control - S88 Mk2 - Pedal set up .jpg


Tagged:

Best Answers

  • Blindeddie
    Blindeddie Member Posts: 1,559 Expert
    edited April 2022 Answer ✓

    did you power down the KB before plugging in the pedal? if not, unplug pedal, power down, plug pedal back in power up KB. Then try setting it up in KK. edit...forgot to mention, it appears you need to use the pedal B input for half damper... I say appears because that is what is being done in the instructions (but you are configuring Pedal A), but does not explicitly state it must be the B input...

  • whwall
    whwall Member Posts: 1 Newcomer
    edited January 2023 Answer ✓

    Yamaha FC3A Foot Pedal setup in Komplete Kontrol with S88 Mk2

    If all else fails, try this.

    Mode = Continuous 

    Invert = switch to the right

    Swap T/R = switch to the left

    Assign Type = Ctrl Change

    MIDI Channel = 1 ; Number = 64

    Range from 0 to 127

    Calibrate - Follow Instructions

Answers

  • Blindeddie
    Blindeddie Member Posts: 1,559 Expert
    edited April 2022 Answer ✓

    did you power down the KB before plugging in the pedal? if not, unplug pedal, power down, plug pedal back in power up KB. Then try setting it up in KK. edit...forgot to mention, it appears you need to use the pedal B input for half damper... I say appears because that is what is being done in the instructions (but you are configuring Pedal A), but does not explicitly state it must be the B input...

  • JPSW
    JPSW Member Posts: 4 Member

    Hi Blindeddie , thanks .. I was going crazy last night ... I left it alone . Today I followed your and NI's instructions ... and hey presto its working . Thanks . James

  • whwall
    whwall Member Posts: 1 Newcomer
    edited January 2023 Answer ✓

    Yamaha FC3A Foot Pedal setup in Komplete Kontrol with S88 Mk2

    If all else fails, try this.

    Mode = Continuous 

    Invert = switch to the right

    Swap T/R = switch to the left

    Assign Type = Ctrl Change

    MIDI Channel = 1 ; Number = 64

    Range from 0 to 127

    Calibrate - Follow Instructions

  • Nico_NI
    Nico_NI Administrator Posts: 1,124 admin

    In case, we have a troubleshooting thread about using sustain pedal with Komplete Kontrol here:

    https://community.native-instruments.com/discussion/5234/tips-how-to-fix-sustain-pedal-issues-on-our-keyboards


  • JPSW
    JPSW Member Posts: 4 Member

    Thanks it's all working now .

  • Octopusbird
    Octopusbird Member Posts: 1 Newcomer
    https://community.native-instruments.com/discussion/comment/47812#Comment_47812

    Hi! I'm having the same problem and it's driving me nuts, but the above comments aren't helping.

    Do you have the FC3A plugged into the Pedal A or B? And was there any other weird things you had to do?

  • JPSW
    JPSW Member Posts: 4 Member

    This worked .. I moved my keyboard to another mac


    Yamaha FC3A Foot Pedal setup in Komplete Kontrol with S88 Mk2

    If all else fails, try this.

    Mode = Continuous 

    Invert = switch to the right

    Swap T/R = switch to the left

    Assign Type = Ctrl Change

    MIDI Channel = 1 ; Number = 64

    Range from 0 to 127

    Calibrate - Follow Instructions

This discussion has been closed.
Back To Top

Categories