Why is after upgrade my Line and Mic input in Traktor MONO Only?

Options
LXNDR_BE
LXNDR_BE Member Posts: 116 Advisor
edited October 2024 in Traktor Software & Hardware

After upgrading (on Windows 10) from 3.6.2 to 3.7.1 all the external inputs within Traktor are MONO only.

I use an S5 and Maschine connected to the Line-Input + a Microphone that has a Stereo-Jack.

After Upgrade to 3.7.1. Mic stopped working, so I switched to a Mono Mic and all was good ( I thought)

Today I reconnected my Maschine MK3 to the Line-Input again and routed the Input to Deck C as Live-Input. Funnily, in "Input Routing" only if I set the "Input Deck C" => L (Mono) I have sound (R has to be Not connected). If I set L(Mono) and R => No Sound.

Same for the AUX Mic Input => only one input connected to L works. If I set L + R => NO SOUND

Checked the Soundsetting on my Windows and both Inputs (Line an Mic) are set to "2 Channel, 48 kHz) and I also see and hear a stereo signal.

Any idea how to fix this?

A Mono Mic is not that bad, but my Maschine only in Mono 😭??

Tagged:

Best Answer

  • LXNDR_BE
    LXNDR_BE Member Posts: 116 Advisor
    Answer ✓

    Found the "trick" .. the Line IN of the S5 only works stereo if the AUX Button is pushed.

    If using both, Line-In and Mic you have no choice - Or Mic is open all the time or Line-In is Mono 🙄

    Using a second soundinterface for the Maschine is (of course) not possible 😞

    Sometimes things suck

Answers

  • LXNDR_BE
    LXNDR_BE Member Posts: 116 Advisor
    Answer ✓

    Found the "trick" .. the Line IN of the S5 only works stereo if the AUX Button is pushed.

    If using both, Line-In and Mic you have no choice - Or Mic is open all the time or Line-In is Mono 🙄

    Using a second soundinterface for the Maschine is (of course) not possible 😞

    Sometimes things suck

This discussion has been closed.
Back To Top

Categories