X1MK3: Community Performance MOD (qml coding)
Comments
-
Correct,
I've used it in a session, and since it has the four-channel option, it's very tedious and annoying when you're on the A/B deck if one of the C/D channels is active. It forces you to go back and deactivate it.Then, if you want to hear them together, the ideal thing would be to press the pre-listen button and, without releasing it, press the other one so you have both at the same time, for example...always on A/B and C/D, of course.
1 -
Replace the file '…\Native Instruments\Traktor Pro 4\Resources64\qml\CSI\Z1MK2\Z1MK2.qml' with this one (save the original).
Does it work? I can't test.
If it does, you will have to apply the mod after every new Traktor update.
0 -
Traktor 4 not run with this mod remains in standby…i put the original back in and it start again without problems.
0 -
Okay, i'll check what i did wrong… ;)
Edit: 2nd version
I tested the new code with S4Mk3 successfully.
0 -
Now TK4 starts and pre-listens correctly, and disables one when you press the other, but now the A/B to C/D deck switching that was done with the top-middle button (the one you press together with the shift key to enter MIDI mode) has been cancelled. Do you understand what I mean? Thanks a lot for the effort, but this one seems to be more complicated. i add: I have restarted Traktor and when I press the deck change button for the first time it does so, it changes to C/D and then when I press it again it goes back to A/B, but from then on it doesn't do this anymore.
1 -
Now that is interesting. Something new to learn for me. I will try it a bit differently.
Edit: I could add it to the X1 mod instead of the Z1 mod. It will work for both, if you use both mods and both devices at the same time. Is that ok, or do you want to use the Z1 alone without X1?
0 -
UPDATE: X1MK3 - Community Performance MOD Version 11 beta 2 TP 4.2.0 :
New Features:
- If deck is synced (and the global clock is tempo master), SYNC(Hold)+LoopEncoder(Turn) adjusts clock BPM.
- Engaging Cue Monitor for one channel automatically deactivates Cue Monitor for the other three channels. This is a global effect for the software and works not just on the X1, as long as a mapping file for the X1 is loaded. (I am looking to make this optional)
Use the original Z1 file. All code is now in the X1 mapping. :)
0 -
Ok, the problem is that I use the simple X1 Mk3 mod, could you implement it in that one? I'd make things easier... hehe
1 -
Tell me how it works… :)
0 -
It works perfectly, great work. It's brilliant to have used the X1 MK3 mod for the Z1 MK2. Now I can play four decks without a problem!
SugerenciasMás preguntas
1 -
You are welcome!
0 -
Hey,
Really new with X1 mk3 controller and also to traktor. Couldn't figure it out myself with the guide on the first page, but is it possible to disable Alternative mixer overlay on the launc menu? I feel like i require Hi/Mid/Low not being on shift to do the basic transitions (maybe to have filter on shift/Right or Left 2nd button?
I initially tried to have only these functions tempo adjust functions, but the file containing only this seemed to crash traktor for me.
Sync[Hold]+LoopTurn: Adjust Tempo by +/- 0.01 BPM.Sync[Hold]+LoopPush[Hold]+LoopTurn: Adjust Tempo by +/- 1.00 BPM.Sync[Hold]+LoopPush: Reset Tempo
Thanks in advance
0 -
If you want to use either of the two mods, you will need the original qml folder and add the mod files to it. You can't combine the two mods.
The knobs can be remapped by overmapping in the controller manager (check the Traktor manual for the basics). Out of the box this will override the knobs for both FX layers and for the MIXER layer. If you engage the overmapping setting in setup mode (bottom right button), you can differentiate between the layers using remix deck sample page selector (pages 1 to 3) for either deck A or B (depending on deck configuration). Only the FX screens at the top will not align to knob use. The same will be true for the buttons.
With this mod i tried to cram in all controls missing from the original mapping, including MixerFX. I may try to add another config like you asked as a custom option in the future, but it's on my backlist so maybe don't wait for it and try the overmapping route described above first. In light of the release of the Z1MK2 i am also not so motivated to add it.
🦋
0 -
Hello! Amazing work you've done Sûlherokhh.
I've been trying to get spinlud's Beats to Que display working with X1MK3_TP4.2.0_MinimalTempoMod_NoMixer_CueMonitor, or as a standalone, but I've been unsuccessful. I'd love this feature!
1 -
I like it too. Looking to get this into both mods as an option. Good to know you are interested as well. :)
0
Categories
- All Categories
- 18 Welcome
- 1.6K Hangout
- 66 NI News
- 873 Tech Talks
- 4.4K Native Access
- 17.3K Komplete
- 2.2K Komplete General
- 4.7K Komplete Kontrol
- 6.2K Kontakt
- 1.1K Reaktor
- 403 Battery 4
- 900 Guitar Rig & FX
- 458 Massive X & Synths
- 1.4K Other Software & Hardware
- 6.2K Maschine
- 8K Traktor
- 8K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators