S4MK3 & S3: Community Performance MOD (qml coding)

1…343536373840»

Comments

  • pixel
    pixel Member Posts: 316 Pro
    edited February 27

    edit: I've obviously overstepped the mark here again.

    It looks like I misunderstood everything and threw an unwarranted fit.
    That's why I'm writing publicly, I know that Sûlherokhh didn't criticize me or anything else I threw up.
    I'm not going to look for excuses, this is 100% on me.
    I apologize for the misconduct and hope that the apology is accepted.

    i really appreciate Sûlherokhh giving us all his code for FREE. yesterday i used Sûlherokhh code from his X1Mod inserted (stem superknobs) with softtakeover in the S3Mod (knobs: gain, eq.high, eq.mid, eq.low) this can be turned on and off for each deck individually, the display is like the other softtakeover S3Mod options. i will test this until the weekend and then upload it here

  • pixel
    pixel Member Posts: 316 Pro

    It looks like I have a mistake in about the S3.
    When I move the deck type switch from stem to stem, no soft tekeover is activated. I'll have to check that again tonight.😌

    I'm not perfect when it comes to people and programming😫

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 3,136 mod

    Me neither, i make mistakes all the time. And the post-by-post forum discussions makes it even easier to misunderstand people.

  • pixel
    pixel Member Posts: 316 Pro

    i have now tested the S3 StemSuperKnobs again it almost works, if i deactivate the S3ModStemReset everything works even the switching between mixerKnobs and stemKnobs with softtakeover.

    if i activate the S3ModStemReset, the switching between mixerKnobs and StemKnobs still works, but when i load a new track into the stem deck and i rotate, the stem values take the values from the superknob value.
    without softtakeover. I think I now know what I meant wrong.😋

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 3,136 mod
    https://community.native-instruments.com/discussion/comment/213640#Comment_213640

    You have to reset the superknob value the same way you reset the stem values when loading a track. And yes, the superknob values need softtakeover as well.

    Update WiP: FX parameter values now have softtakeover functionality. All this in preparation to assign the FX section to adjust stem/remix parameters when overlay is toggled.

  • pixel
    pixel Member Posts: 316 Pro

    yes, that worked, I forgot that when resetting the stem. now it works cool🤗

  • pixel
    pixel Member Posts: 316 Pro
    https://community.native-instruments.com/discussion/comment/212677#Comment_212677

    I'm thinking of doing it now so that when stemSuperknobs is enabled, the pads only have the tap option, so the hold option is disabled and the tap option is triggered directly on the pressbutton. would that be better?
    I'll just test this tomorrow for fun.

  • Razzor
    Razzor Member Posts: 8 Member
    https://community.native-instruments.com/discussion/comment/213039#Comment_213039

    Hello Guys,

    I tried to keep up with the changes and follow all the changes that were discussed here.

    Yes, talking about complex problems and finding solutions in a forum is not the easiest task. I was always happy to see that you support each other and try to help each other. Something really great has been created here and every time I use my controller (S4 MK3) I have to think of this achievement.

    It is all the more difficult to admit a mistake, and I have great respect for that. I am all the more pleased that you continue to work together and are a great help to all of us. So here's to further cooperation!

    Keep up the great work guys! Cheers

  • pixel
    pixel Member Posts: 316 Pro

    I still regret this stupid action.
    #############
    I created 2 videos showing how it works on the S3 [Sûlherokhh stem-superknobs].
    The one with the deactivated pads hold option is included (when stem knobs is enabled).

    So the pads option (muted, filter_on) are then processed directly during the press pads

    I'll test this in action for another 1-2 days and then upload it here

    stem-videos.zip


    I'm wondering if I should enable or disable the [Sûlherokhh stem-superknobs] by default?
    the setting remains saved even after restarting traktor

Back To Top

Categories