X1MK3: Community Performance MOD (qml coding)
Comments
-
Na, it wouldn't be a waste of time. I was planning to phase out the NI Blinker modules (in use currently for the PLAY and CUE LEDs) anyway to replace them with qml timers converted to blink functionality. They are much more versatile and it's easy to incorporate a value assignment to Traktor parameters.
Will take a bit and some more testing, starting at the weekend probably. :)
1 -
Much appreciated! I'd be happy to help with testing of course.
1 -
I'll upload a working beta when it's done. :)
1 -
removed the modifiers and set as above.
Decks A/B working as expected. Decks C/D also controlling decks A/B.actually I'm getting some strange issues when switching between pages on the X1.
if I cycle through from effects to mixer and back C/D mixer screen is controlling both pairs of EQ (A/C & B/D)
effects 1/2 or 3/4 is controlling EQ A/B.
I've quit and restarted Traktor a few times.
1 -
If you upload your x1 tsi file i can more easily reproduce and understand what's wrong.
1 -
Attached, thanks.
I have only the X1 connected and in use at the time of testing, I hope that's the right file.
1 -
Yup, reproduced and it's clear i made a logical mistake. As is it only works correctly if you don't switch decks and only map one pair of mixer controls instead of all 4, per X1. If you have two x1s, it should work correctly. I have to think about how to implement this for 4 deck use without blocking the use of an X1 side by side with an S4.
If i disregard the S4 (which also uses sample page selector for the grid marker jumps) i already have an idea on how to repair this. Probably this will be the way. Not many people are going to use X1+S4 combo. Probably.
1 -
Just got my X1 Mk3 so starting to dig through this thread. One thing I was immediately thinking with the lights underneath if they could act as a (pre-fader) vue-meter and was disappointed to see no such option. Anyone looked into this?
0 -
On the other aspects I will try to now overmap the following:
1) Shift+Browse Knob on the left goes through the favorites and on the left goes through the tree2) Shift+Loop Knob uses Loop Move by 1 Beat instead of moving the entire loop by the loop length
3) Holding the nudge button and turning the Loop Knob will seek through the track
4) Add hold effects on hotcue button 3/4, one for a delay+free for transitions and another one where I group 3 effects that gradually start from 0 and increase the longer I hold as a tension builder
I guess for all of these things it would be a bit overkill to use this mod.0 -
- Favorites are accessible in Browse Mode.
- and 3. Browse Encoder becomes Move Encoder (S4 style) when not in Browse Mode, Shift+Browse Encoder Moves Loop (or beatjumps) by 1 beat. Can be used to seek through deck (in Loop Size jumps) when not using Shift.
Go to Page 1 for a complete description of the mod. The mod is also useful if you want to overmap the Knobs and Buttons of the FX section, as it helps to differentiate between the overlays selected. Recoding the lights underneath to be VU meters was also one of my first thoughts. Haven't gotten around to playing with it and apart from that, the LED's already have useful functions i didn't want to interfere with (yet). Thanks for reminding me. :)
1 -
Just a heads up that I got it working with MIDI. Yup, I still use Mk2 because of the encoders.
1 -
Haha, nice! :D
Nothing wrong with the Mk2's. I always loved the 7seg-displays.
1 -
Work on overlay-overmapping capabilities and MIDI Cue/Play blinker signal in progress… will still take a bit.
2 -
Lovely jubbly!
I made some progress on the MIDI side yesterday. So far it works good.
I don't think anyone has done it before or at least I haven't seen it on Traktor. NI should make that standard in my opinion.2 -
This beta flips the unused sample page selector to page 4 so that no conflicts should occur anymore.
It flips both sides to page 4 when in setup, so you can use the custom toggles without triggering any overmappings.
You will probably not see it by glancing at the code, but this was a real brainf**k. :) Test as much as possible.
@Stevan :
MIDI timer signals for Sequencer step toggles in the works.
2
Categories
- All Categories
- 18 Welcome
- 1.7K Hangout
- 67 NI News
- 896 Tech Talks
- 4.6K Native Access
- 17.8K Komplete
- 2.2K Komplete General
- 4.8K Komplete Kontrol
- 6.3K Kontakt
- 1.1K Reaktor
- 407 Battery 4
- 917 Guitar Rig & FX
- 465 Massive X & Synths
- 1.5K Other Software & Hardware
- 6.4K Maschine
- 8.2K Traktor
- 8.2K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators