S88 Mk2 Sustain Pedal stopped Working

ColonelClarence Member Posts: 4 Member

October 5 edited October 5 in Komplete Kontrol

The sustain pedal on my S88 Mk2 just stopped working. I've tried all the configuration fixes I can find but no joy. The pedal is an M.audio, which is working properly. Using a midi monitor, I can see that no midi messages are being issued when the pedal is pressed and released. I've also noticed that sometimes when plugging/unplugging the pedal, the sustain function is activated and cannot be deactivated without powering off.

Any help/tips would be much appreciated

1

Best Answer

ColonelClarence Member Posts: 4 Member

October 9 Answer ✓

Sorry guys - problem turned out to be an intermittent connection in the pedal's phone plug.

1

Answers

academyofrock Member Posts: 32 Member

October 5

I'm having the same issue. The pedal sends MIDI to Logic but nothing actually works. I too have been through all the fixes suggested.

0
ColonelClarence Member Posts: 4 Member

October 5

My condolonces…

0
PoorFellow Moderator Posts: 4,815 mod

October 8

@Jeremy_NI , do you have any insight that could possibly be of help here ?

0
Jeremy_NI Customer Care Posts: 12,971 mod

October 9

https://community.native-instruments.com/discussion/36951/s88-mk2-sustain-pedal-stopped-working

What is your operating system? Is it the same in Komplete Kontrol in standalone?
Have you checked these steps? How to Configure Sustain / Expression Pedals on Kontrol Keyboards
Make also sure to check the following:
https://community.native-instruments.com/discussion/5234/tips-how-to-fix-sustain-pedal-issues-on-our-mk2-keyboards

0
ColonelClarence Member Posts: 4 Member

October 9 Answer ✓

Sorry guys - problem turned out to be an intermittent connection in the pedal's phone plug.

1
Jeremy_NI Customer Care Posts: 12,971 mod

October 9

https://community.native-instruments.com/discussion/comment/183051#Comment_183051

Thanks for the update, glad that you found the solution for this issue!

1

Categories