Traktor pro 4 and Xone:96

gregnb
gregnb Member Posts: 3 Member
edited October 2024 in Traktor Software & Hardware

Hi all. I have a problem with Traktor 4 and xone:96, No signal on the outputs. Has anyone tested tp4 with xone:96?

Comments

  • Owner
    Owner Member Posts: 587 Guru

    There are a few problems with to many outputchannels, as mentioned in the release notes. There will hopefully soon be a hotfix for it.

    Try to route your channels to other outputs and have a look, if it helps.

  • lord-carlos
    lord-carlos Member Posts: 3,762 Expert

    Yes, works for me.

    But there is currently a bug with external mixers the devs are working on.

    Try mapping deck a to channel 0 and 1, deck b to 2 and 3 and so on.

    Or use tp3 until the next patch.

  • gregnb
    gregnb Member Posts: 3 Member

    Ok, Works with 0,1 & 2,3. Thx

  • Owner
    Owner Member Posts: 587 Guru

    Nice! Good to know.

  • Isotoxin
    Isotoxin Member Posts: 212 Advisor

    KNOWN ISSUE: Audio Interfaces with more than 12 channels

    When using an Audio Interface with more than 12 channels it is currently not possible to select channels with a index above 2 for Deck A, above 4 for Deck b, above 6 for Deck C, and above 8 for Deck D. This issue will be resolved very soon.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,996 mod
    https://community.native-instruments.com/discussion/33379/traktor-pro-4-and-xone-96

    Works for me.

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert

    Just tried Traktor Pro 4 on my "big setup" with the Xone:96 for the first time. Was afraid it wouldn't work after this thread but I had no issues. All setting were just like on TP3 before. Deck A on channels 3/4, Deck B on 5/6, C on 1/2 and D on 7/8. In the settings I could select all channels even on Deck A. Didn't try more as I didn't want challenge my luck.

    But Xone:96 has only 12 channels not more than that it shouldn't be affected by the known issue at all.

  • Isotoxin
    Isotoxin Member Posts: 212 Advisor
    https://community.native-instruments.com/discussion/comment/167066#Comment_167066

    The problem is not the amount of the 12 channels, but the specific channel to the specific deck if You have more than 12 channels.

    When using an Audio Interface with more than 12 channels it is currently not possible to select channels with a index above 2 for Deck A, above 4 for Deck B, above 6 for Deck C, and above 8 for Deck D. This issue will be resolved very soon.

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert

    I know but if Xone:96 would be affected, I couldn't select select Channels 3/4 for Deck A (as index would be above 2). This works at least with my Xone:96. And Xone:96 has 12 channels not more than 12, therefore it shouldn't be affected by this known issue at all.

    @gregnb had issues with his Xone but it worked after he selected Channels 1/2 for Deck, 3/4 for B and so on. Seems odd to me.

  • lord-carlos
    lord-carlos Member Posts: 3,762 Expert

    I wonder if it's an OS specific thing? For me on windows it's also working like tp3.

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert

    macOS 14.5 Sonoma for me.

  • lord-carlos
    lord-carlos Member Posts: 3,762 Expert

    @gregnb and @maniacintosh81 can you update to 4.0.1 and see if that solves your problem?

  • Isotoxin
    Isotoxin Member Posts: 212 Advisor
    https://community.native-instruments.com/discussion/comment/167933#Comment_167933

    Can confirm 4th channel selected as a 9/10 audio interface channels - works with 4.0.1 version.

  • gregnb
    gregnb Member Posts: 3 Member

    @lord-carlos after the update to 4.0.1 works.

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert
    https://community.native-instruments.com/discussion/comment/167933#Comment_167933

    I can check 4.0.1 with my Xone:96 not before tomorrow but had no issues with 4.0.0 either. Could assign all channels as needed.

This discussion has been closed.
Back To Top

Categories