Remix set does not sync with decks A or B

2»

Answers

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,996 mod
    edited May 2024
    https://community.native-instruments.com/discussion/comment/153838#Comment_153838

    Good luck and tell us how you fare.

    With 'Kontrol F1'-Output you mean the Remix Deck inside Traktor (A, B, C or D), right?

    Which of your decks are routed through which of your audio interface outputs? You already described where they lead into your mixer, but not the source decks. Which deck is your remix deck?

    Using the Audio 8 seems to me to be the best solution, if you can get it to run on your OS. It's got all the inputs and outputs i would ever need and i thought about getting one many years ago, before i settled for the Audio 2 as a very lightweight alternative using Traktor's internal mixer.

    Edit: I just checked your mixer and it looks like it may have an audio interface itself(?). There is a USB connection and you can set every channel input to USB. If you set Traktor preferences to 'external', and the assign each of your decks to one of the channels, this may also be a solution.

  • lord-carlos
    lord-carlos Member Posts: 3,762 Expert
    https://community.native-instruments.com/discussion/comment/153847#Comment_153847

    I think you can only set channel 3 to USB on that mixer.

    There is a reason it's a 4 channel mixer below 200 EUR ;-)

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,996 mod

    Oops, yes. It seems you are right. :)

    preview.jpg

  • Vassile
    Vassile Member Posts: 15 Member

    Hi, yes, the DM400 only has a USB output, although it sounds very good, I'm happy with it. I found the old NI Audio 8 DJ in my attic together with a Magma Switchbox and I think I'll keep them again. Impossible to get the Audio 8 DJ card to work with W10, I couldn't get it to work, a pity, because it's a good sound card. The problem persists, now I'm thinking of buying a USB audio controller with 4 stereo outputs, for 3 decks + Kontrol F1 and thus have a single external audio card that manages everything, to try to correct the problem..., if it is the "latency". Do you recommend a card? Here's an image of the current audio configuration, with my Komplete Audio 2.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,996 mod

    The only dedicated external audio interface i ever used was the Audio 2 (which is awesome for it's limited I/O). Someone else needs to answer this one, although you should be able to find lots of reviews for 4x4 stereo interfaces.

  • Vassile
    Vassile Member Posts: 15 Member

    Hi, this is my setup.

    1.jpg
    2.jpg

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,996 mod

    Can you adjust the latency of the Komplete Audio 2? I know i can't change it on the K2, and it's latency is at the upper end of what i like.

    If they differ in latency i would definitely acquire an interface for all three channels together. Or buy a mixer with an integrated interface (which is more costly of course).

  • Vassile
    Vassile Member Posts: 15 Member

    Varying the latency I can't get anything, I've tried many ways. However, if I assign deck C (Kontrol F1) to output 1 and 2 (deck A) of the Xone K2, Remix Set plays when the fader of channel A is up on the DM400 and everything is fine, now Traktor does sync. So I have no choice but to get an external audio interface that handles K2 + F1 or a mixer with an integrated interface, but this will increase the budget.

  • Sûlherokhh
    Sûlherokhh Member, Traktor Mapping Mod Posts: 2,996 mod

    After your test it is clear that there are latency differences. A new interface is cheaper than a new mixer though. I heard that focusrite have decent prices with good performance. But don't trust me on that. :)

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    Just a tought, did you try to install the A8 in Windows 7 compatibility mode. That's only way to get my old BCD3000 to work with Win10.

This discussion has been closed.
Back To Top

Categories