Send FX to Xone 96

phil_a
phil_a Member Posts: 4 Newcomer
edited October 2024 in Maschine
Hello,

I use Maschine 2 and the Maschine MK3 controller for my DJ set-up in conjunction with an Xone 96 mixer. I would like to send a reverb from the software to one of the two send/return channels of the mixer, which would save me the need for an external effects unit. With other DAW's like Ableton this is possible without any problems, unfortunately I could not find anything with Maschine 2 and therefore I turn to you and maybe you can tell me a) if this is possible at all and b) what exactly I have to set and configure so that I can use the effect on my mixer.

I Play also with Traktor and I know I can use a FX Section to send them to the Mixer, but I play up to 4 Decks and I need all FX Sections for all my decks.

I use a Mac if this is important.

I look forward to an answer from you.

Phil
Tagged:

Best Answers

  • 6xes
    6xes Member Posts: 862 Pro
    Answer ✓

    in Maschine you have 4 stereo inputs you can bring sound into or 8 monos L&R per channel

    how you decide to bring the sound in is up to your, whether virtual or physical

    create group/go on the sound slot/ click input.. add FXplugins and then send it through the output



    image.png


  • Vic Angelo
    Vic Angelo Member Posts: 127 Advisor
    Answer ✓
    https://community.native-instruments.com/discussion/comment/133717#Comment_133717

    6xes has the right idea, but you need more details

    1.) Make sure your inputs and outputs are enable in PREFERENCES, Assign a MASCHINE OUT number.

    Example MASCHINE OUT 2 (Also know as "Ext. 2" in the Mixer section) send to Channel 11/12 on the XONE96 for Send A and 13/14 for Send B, I might be wrong on the number but you get the idea.

    Screen Shot 2024-02-16 at 7.04.35 PM.png

    2.) Use the routing options in either CHANNEL or in the MIXER, to route the Group or Sound audio out to the corresponding MASCHINE OUT you assigned to Send A and Send B

    Screen Shot 2024-02-16 at 7.06.19 PM.png


Answers

  • 6xes
    6xes Member Posts: 862 Pro
    Answer ✓

    in Maschine you have 4 stereo inputs you can bring sound into or 8 monos L&R per channel

    how you decide to bring the sound in is up to your, whether virtual or physical

    create group/go on the sound slot/ click input.. add FXplugins and then send it through the output



    image.png


  • Vic Angelo
    Vic Angelo Member Posts: 127 Advisor
    Answer ✓
    https://community.native-instruments.com/discussion/comment/133717#Comment_133717

    6xes has the right idea, but you need more details

    1.) Make sure your inputs and outputs are enable in PREFERENCES, Assign a MASCHINE OUT number.

    Example MASCHINE OUT 2 (Also know as "Ext. 2" in the Mixer section) send to Channel 11/12 on the XONE96 for Send A and 13/14 for Send B, I might be wrong on the number but you get the idea.

    Screen Shot 2024-02-16 at 7.04.35 PM.png

    2.) Use the routing options in either CHANNEL or in the MIXER, to route the Group or Sound audio out to the corresponding MASCHINE OUT you assigned to Send A and Send B

    Screen Shot 2024-02-16 at 7.06.19 PM.png


  • phil_a
    phil_a Member Posts: 4 Newcomer
    @6xes @"Vic Angelo"

    Hey Mates,

    it Works! Many Thanks! Now I use Channel 1-4 for Traktor, 9/10 for the Reverb to use it for the other Channels and 11/12 for the Instruments that came from the MK3. I Think for now my Set Up is complete.

    A thing that is a litte annoying that Maschine 2 does not recognize the two K2 Controller (Channel 1 and Channel 2), the Software thinks is one, so I have to work around, but its ok.
This discussion has been closed.
Back To Top

Categories