Maschine+ compatible audio interfaces thread

Thanks for sharing the insights. In that case I will have to try connecting my MacBook Pro instead of my iPad Pro and see if it solves the problems. But still, the M+ should be the audio clock master, which shouldn’t be the case.

Just update my experiences with a RME babyface gen1 and Maschine+

Works great for a budget 2nd interface. if your going to adat (in my case a umc1820 connected to an iPad), it’s also bus powered and that’s convenient. No glitches, really clean signal. But the analogue I/o count of the babyface is limited.

caveats. When connected to the Maschine+ the babyface is in standalone mode. This means that the routing is set to default. Adat out from the m+ works great. But with the gen1 (and I don’t know with the others), there is no control in configuring the I/o matrix from the hardware, and no memory to save any routing.

https://forum.rme-audio.de/viewtopic.php?id=38528

All devices at latest firmware, no issues with it disconnecting (that I got with the iConnect devices - although playing with the settings of the iCA4a fixed that but not the audio artefacts when loading new devices on the m+ that I guess was a CPU spike issue effecting the clock). The RME and umc1820 were the most stable CC audio interfaces devices I have used across multiple different grooveBoxes.

Anyone else Here who‘ve tested a Audient ID44 Mk1 with Maschine Plus?

if yes , what‘s your expierence with it ?

Hey there,

good news:

Audient ID 44 MK1 works stable and solid on the M+ since the Update 1.5

No,

it doesn‘t work before the Update. There were Soundcrackles and the Beatz were Played very Slow .

now After the Update 1.5 it works stable and solid without any issues.