Maschine+ Power Bank guide
Comments
-
—https://www.amazon.de/-/nl/dp/B08XQ2LM7L?psc=1&smid=A2CUVTF1JUW5R0&ref_=chk_typ_quicklook_imgToDp
Can someone confirm if this powerbank would work.
thanks in advance
0 -
Yes, the output specs match the guide.
Make sure to buy the right 15V USB-C PD cable!
1 -
Thank you very much.
0 -
Thanks for this! How long does the charge last while powering the Maschine?
0 -
Hi, I know this was directed to another poster but for what it’s worth the 60W/30000mah battery I’m using last about 4-6 hours of continuous playing in the Maschine (it’s going to vary based on the workload of your projects). So its definitely enough to get you through a jam session or performance.
imuto 30000mAh Power Bank 60W PD https://a.co/d/iHBEnZ4
1 -
Strange.... That is very little time for 30000mah, mine does 9+ hours with 20000mah.
0 -
I also get around between 8 or 9 hours from a 20.000 battery
0 -
Oops I should have mentioned that I’m usually powering a Roland Sp404 MK2 with the M+ on the same battery so that’s why I get those shorter times. I’ll run just the M+ on a full charge and see how long it lasts and report back, sorry for the confusion.
0 -
I got the Birdcord PD to 15V adapter
and the Baseus 20000mAh power bank
Works perfectly with both my Maschine+ and Traktor S4mk3
1 -
this one is not to use:
works, but discharges within days from 100% to 0%. this is absolutely inacceptible. baseus support is not reacting on my messages.
sad.
0 -
Interesting... It discharges by itself? Did you by any chance leave a cable attached to it? this can cause the powerbank to stay switched on and slowly discharge itself.
1 -
read the 1-star ratings. it's a problem of this powerbank. i had two of them, same problem.
of course there was nothing attached to the powerbank when not used :-)
0 -
My previous powerbank did initially work with my M+ but then one day it just stopped working. Keeled over and died. Also no response from the manufacturer.
That was a Charmast C2032
Current one is AOHi AOC-P007 which is also able to run my Push 3. :-)
1 -
Hi, I just received a Birdcord PD ➔ 15V (USB PD Voltage Converter)
Have a question, its working strange. I have a Maschine + and a brand new imuto Power Bank 20000mAh PD 65W
Tested with the cable that came with the power bank and a Anker Powerline III Cable USB-C PD 60W
Steps to reproduce
- Turn on the power bank
- Connect it to Maschine +
- Turn on Maschine +
- After a few seconds it will turn off
- Turn Maschine + back on and it stays on and working correctly
My concern is about step 4, why is this happening, is it the cable or the power bank? It happens all the time.
This won't happen with the wall power supply. Also tried swapping step 1 and 2 but with the same result.
Thanks
0
Categories
- All Categories
- 19 Welcome
- 1.3K Hangout
- 59 NI News
- 705 Tech Talks
- 3.6K Native Access
- 15.1K Komplete
- 1.8K Komplete General
- 4K Komplete Kontrol
- 5.2K Kontakt
- 1.5K Reaktor
- 353 Battery 4
- 783 Guitar Rig & FX
- 403 Massive X & Synths
- 1.1K Other Software & Hardware
- 5.2K Maschine
- 6.7K Traktor
- 6.7K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators