CDJ3000 HID outer jog wheel response not so great?

dj_karlp
dj_karlp Member Posts: 7 Member
edited October 22 in Traktor Software & Hardware

I've used HID with CDJ2000, CDJ2000Nexus, CDJ2000Nexus2 & XDJ1000mk2 and all have very good response on the outer jog nudging (pulling or pushing) the track (as visualised in the Phase Meter display above the track deck when another track is playing)

Just started using Trakor HID with CDJ3000s and so far the main issue really impacting performance is the outer wheel response. It seems to respond to short quick movements, but going slower I can turn it for revolutions and the track doesn't nudge. It's the fine fidelity of this adjustment that needs resolving, the short sharp movements of the wheel nudge it too much.

Any suggestions?

High spec Windows 11 laptop, Traktor 3.6.1 326 & CDJ3000 Firmware v2.03

Best Answer

  • dj_karlp
    dj_karlp Member Posts: 7 Member
    edited November 2022 Answer ✓
    Capture.PNG

    As luck would have it, spotted this after posting... so will try updating version


    Update: Fixed with 3.6.2...phew

Answers

  • dj_karlp
    dj_karlp Member Posts: 7 Member
    edited November 2022 Answer ✓
    Capture.PNG

    As luck would have it, spotted this after posting... so will try updating version


    Update: Fixed with 3.6.2...phew

This discussion has been closed.
Back To Top

Categories