Issue with Phase/ MacBook Pro

Djspotakus
Member Posts: 1 Newcomer
Just bought Phase and it won’t connect with the z2 mixer correctly. I get signal through the thru. But nothing else. Phase is 7.0
Just updated to Monterrey and Traktor is updated as well. Still no luck. Any idea no how to get a fix?
Tagged:
0
Comments
-
- Connect the receiver to your Z2 mixer with the cinch cables an connect it also with USB to your computer. Important: use line-in inputs, not phono
- Make sure you have selected the correct timecode signal in the Phase Manager settings - pic1
- Calibrate the plugs (transmitters) correctly - pic2
- Set the channel switch on the Z2 to line (not phono) (not thru)
- Select the correct inputs in the Traktor settings - pic3
- Now you should get a signal. The time code does not calibrate correctly because the needle position does not track properly. Annoying little bug from Traktor - pic4
0 -
By the way: Please upvote this feature request in the ideas section for Phase HID integration like in Serato. Thanks!
0 -
Why was the post removed?
0 -
Whuat, I can't also find it anymore and wonder why?
@Kaiwan_NI Did you know whats going on with this feature request in the Ideas Section?
1
Back To Top
Categories
- All Categories
- 21 Welcome
- 755 Hangout
- 73 NI News
- 357 Tech Talks
- 1.6K Native Access
- 7.3K Komplete
- 938 Komplete General
- 1.7K Komplete Kontrol
- 2.7K Kontakt
- 661 Reaktor
- 231 Battery 4
- 399 Guitar Rig & FX
- 264 Massive X & Synths
- 395 Other Software & Hardware
- 3.1K Maschine
- 23 Sampling Room
- 3.8K Traktor
- 3.6K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators