Audio Module Audio Signal Not Routing To Group EFX

Antonio B

*Using MK3 Hardware Audio Outs to monitors

*I Use One Sound per Group because, A. Im a minimalist and, B. I need differnt length loops per sound/part

When Using Audio Module: When Audio Out in Channel is set to Group, the audio from the Audio Module goes silent. There seems to be no way to send audio out through the Group level efx. When Audio Out is set to Group, the signal level can be SEEN in the Sound Level Mixer ONLY- but audio goes SILENT.

The only way to hear audio when using Audio Sound Module is to set Audio Out to Master.

Is that the way it works when using audio module? That doesnt seem right.🤔

Ive tried all settings.

Antonio B

Thanks, but that wasn't it. I had already tried all that out before asking the question. Turns out it was a corrupt project file 😳. The clue was that I tested by setting up the same routing on a group2/sound1 (i only use one sound per group because I need dif lengths for each sound). And everything worked as it should - with the same settings! Ugh. I'm not sure how the project became corrupt, but as a graphic designer, Photoshop files and the program themselves can start behaving wonky. What I thought would be rather easy to do (hook up an external synth and rout its audio and midi - turned out to be a long frustrating endeavor lol