Integration with Xone 92

Ollietuv
Ollietuv Member Posts: 2 Newcomer
in Traktor Software & Hardware

looking for advice to connect a Xone 92 to X1 and Z1. I have a Pioneer interface 2 for my DVS (time code) setup. How would I go about connecting the X1 and Z1 to my setup?

Best Answer

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert
    Answer ✓

    Yes, X1 is plug and play with Traktor Pro. And yes you can use loops, effects and hot cues on decks in DVS mode in Traktor.

Answers

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert

    Connect your X1 via USB to your computer. Should be plug and play with Traktor Pro. You would connect your Z1 via USB too, but using a Z1 in this setup is not really useful - you already have a mixer with your Xone.

    If you have a X1 Mk1: It is no more supported on modern versions of macOS. But community user @Opa has created a solution for that.

  • lord-carlos
    lord-carlos Member Posts: 3,762 Expert

    Connect an audio interface to your computer via USB, and from the interface rca from output to the inputs of the xone.

    Set the audio to external mixing mode and set up the output routing.

    That should be it or for the audio part. Connect the x1 to control traktor.

    Don't use the Z1.

  • Ollietuv
    Ollietuv Member Posts: 2 Newcomer

    Thanks for answering so quickly. So, my Pio Interface 2 is already connected to the laptop. My turntables are connected to the interface inputs and the outputs then connected to the phono inputs of the mixer. Are you saying that by connecting the X1 to my laptop it’ll just be plug and play? Can I use the effects over the tracks that are loaded on the channels which are using DVS?

  • maniacintosh81
    maniacintosh81 Member Posts: 765 Expert
    Answer ✓

    Yes, X1 is plug and play with Traktor Pro. And yes you can use loops, effects and hot cues on decks in DVS mode in Traktor.

Back To Top

Categories