Is my Audio In and Mic In on Mascine+ Doesn't Work?

David RIVIERE · 2024-10-31T18:55:39+00:00

There was an error rendering this rich post.

Hi,

I've followed all the instructions to plug a microphone or a guitar in the audio in or in the Mic in enter… To sample a voice or a guitar… But i have no signal…

Does it means that audio in and Mic in doesn't work?

Find more posts tagged with

Accepted answers

Uwe303

Hello,

have you checked audio settings, have you monitor on in the sampler settings and do you have selected the correct input on the sampler?

All comments

Uwe303

Hello,

have you checked audio settings, have you monitor on in the sampler settings and do you have selected the correct input on the sampler?

David RIVIERE

Hi Uwe303,

Thx for the answer !

Unfortunatly yeah… It seems that i've set all the settings right…

But i'm wondering about one thing: in the 1rst page of the audio settings, for the interface, the only choice i have for "Device" is "internal".

Do i have to synchronize the Maschine + with my computer to sample with the audio In ?

By the way, i went on your soundcloud page…😉

I don't know if it's because i was listening his concerts lately but in a way it remind me, in some aspect, Nils Frahm.

Do you know him?

David RIVIERE

Re Hi,

Actually what i should ask is : Is it possible to sample in Audio In, in mode standelone?

olafmol

check this video, repeat the steps, it should all work. Make sure you have the "input gain" on the rear panel turned up btw

https://www.youtube.com/watch?v=d6YLXQjfI3Q

tetsuneko

Is your mic a dynamic or a condenser? M+ only works with dynamic mics, unless you use a Kontrol Audio interface with it which has a proper mic preamp with optional +48V Phantom power

Uwe303

And "internal" is correct, you have another option if you connect another class compliant interface.

Quick links

Unanswered questions