TRaktor 3 LE DVS

Massimek

Hello

I am using a Xone 23c which I reconfigured but I cant find the DVS option on Traktor 3 LE.

Is DVS available also on Traktor 3 LE or only in the Pro version?

maniacintosh81

DVS only works with Traktor Pro not with LE version.

lord-carlos

Choose the ASIO driver in the drop down.

After that you should be able to choose 4 different channels in the output routing.

And then all the knobs should work. It's independent on traktor and does not need any mapping.

maniacintosh81

DVS only works with Traktor Pro not with LE version.

Massimek

Thank you very much.

OK now I installed Traktor 3 but on the output deck B I only see 1 and 2 and I dont see anywhere 3 and 4.

Would you know why?

lord-carlos

Can you show us a screen shot of your output routing setting?

Massimek

thank you for yor help!

lord-carlos

And there are only 2 channels in total you can select in the drop down?

What device do you have selected in audio setup?

maniacintosh81

Have you selected your Xone:23C as audio interface in "Audio Setup". According to following video the interface of Xone:23C identifies as "Xone:23C" not as "Digital Audio Interface".

https://www.youtube.com/watch?v=StDsJi6o_CI

Massimek

Yes I can only see 1 and 2 in any Deck… I dont understand why..

I manage to make one deck working with DVS but I need channel 3 and 4 also for the full setup..

Also, I cant find mapping for Traktor for this mixer..

Massimek

Hi Maniac, Yes I followed that video to the letter but at the time of the setup I am missing the 3 and 4 channel..

lord-carlos

What device do you have selected in audio setup?

Edit: (And did you install the drivers? https://www.allen-heath.com/hardware/xone-series/xone23c/resources/ )

Also, I cant find mapping for Traktor for this mixer..

Uhh, why do you want to map the mixer? That should not be needed unless you really want something specific.

maniacintosh81

What do you have selected in your Audio Setup pane? Can you upload a screenshot of it?

So far it looks like that you have selected another audio interface in Traktor not your Xone:23C or you haven't installed the drivers for the Xone:23C. The manual states that the drivers are required on Windows to access all channels on the 23C.

Massimek

Drivers are installed. I also did a clen reinstall of Traktor 3 but I still in output routing I have only channel 1 and 2. thank you

Massimek

With the current setup only one turntable work but also only the monitor knob works on the Mixer, any other knobs is not responding, i.e. ( treble, mid, volume fader…)

maniacintosh81

You have chosen the WASAPI driver, is an ASIO driver also installed? Try to use this, if it is not available follow the steps ob pages 13 and 14 of Xone:23C manual.

lord-carlos

Choose the ASIO driver in the drop down.

After that you should be able to choose 4 different channels in the output routing.

And then all the knobs should work. It's independent on traktor and does not need any mapping.

Massimek

thank you everyone!!! indeed the issue was the Asio driver not correctly installed. Now I can select it and the mixer is working fine.

You have all been fantastic in your support. Much appreciated!