Is anyone getting bad 20+ms latency when using audio over usb?
I have a Maschine+ and a Nord Drum, the Maschine+ is 19ms behind the Nord, when both are sequenced externally from the same device.
The signal path is:
- Maschine+ -> usb -> babyface(CC mode) -> analogue -> mixer
- Nord Drum -> analog -> mixer
If I go Maschine+ -> analog -> mixer then the offset between them is ok. i.e. it's too small to hear. I tested going out of the baby face with ADAT, and the issue persists. So the delay is between the m+ and the babyface
The RME gear should be less than 1.5ms. The m+ is 5.8ms. So I should be getting no more than 9ms, but I have 19ms, and it's clearly audible.
