is it possible to have 2 Soundcards with Traktor DJ3 Pro?

SmartHome
SmartHome Member Posts: 3 Newcomer
edited October 22 in Other Software & Hardware
grafik.png

this are my two soundcards. But its not possible to set them in the Output Routing. i can just set one. What i do wrong?

Best Answer

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,084 mod
    edited November 2023 Answer ✓
    https://community.native-instruments.com/discussion/19278/is-it-possible-to-have-2-soundcards-with-traktor-dj3-pro

    Those are not 2 sound cards! There is only one device here.

    It just have 2 options: To work either on 48, either on 44.1 kHz. But of course you can not have them both at the same time.

    Another 2 huge disadvantages are that:

    • it is not a real audio card, but rather a cheap solution (usually for laptops)
    • it is extremely old (2010 or older)

    But, apart of all the above, Traktor (as most audio software) is working with one sound card only. There are ways to overcome this of course (with some kind of rerouting, however, still there will be always only one main device) but definitely not with one device, especially with a device such as C-MEDIA.

    Sorry... :-)

Answers

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,084 mod
    edited November 2023 Answer ✓
    https://community.native-instruments.com/discussion/19278/is-it-possible-to-have-2-soundcards-with-traktor-dj3-pro

    Those are not 2 sound cards! There is only one device here.

    It just have 2 options: To work either on 48, either on 44.1 kHz. But of course you can not have them both at the same time.

    Another 2 huge disadvantages are that:

    • it is not a real audio card, but rather a cheap solution (usually for laptops)
    • it is extremely old (2010 or older)

    But, apart of all the above, Traktor (as most audio software) is working with one sound card only. There are ways to overcome this of course (with some kind of rerouting, however, still there will be always only one main device) but definitely not with one device, especially with a device such as C-MEDIA.

    Sorry... :-)

  • Kubrak
    Kubrak Member Posts: 3,067 Expert

    If you have two (or more) audiointerfaces you may use them together in Traktor using ASIO4ALL or similar SW. But the question is how well it will work.

  • SmartHome
    SmartHome Member Posts: 3 Newcomer

    with Traktor 1 it was possible. I used 1 Soundcard (the same one like here) from the earphones and the other one for Line-Out. It is this what i need. Do i have to buynew ones? Anyone an idea witch one i have to buy?

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,084 mod
    https://community.native-instruments.com/discussion/comment/112756#Comment_112756

    Really sorry to say that, but both Traktor 1 and your C-Media card are ancient history... you can't expect a serious performance with such device. I suggest to get a modern audio card, even a very cheap one can do much more things and much better.

    Another very good possibility is a software much more advanced and much more flexible than ASIO4All, The Voicemeeter. You can use a basic version for free and ever their Pro versions are ridiculously cheap. Check it here:

    https://vb-audio.com/Voicemeeter/


  • SmartHome
    SmartHome Member Posts: 3 Newcomer

    I have very low standards. I run a small bar and need maybe 5% of the options in Traktor. Because I knew it from before, I bought the software. Can you recommend a sound card with two outputs for my needs?

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,084 mod
    https://community.native-instruments.com/discussion/comment/112761#Comment_112761

    Read this one, is a good article and will help you make the right choice :-)

    https://www.gearank.com/guides/cheap-audio-interface


This discussion has been closed.
Back To Top

Categories