How do I connect my mic with Maschine MK3 in Logic Pro?

Smitha229
Smitha229 Member Posts: 7 Sine
edited March 9 in Maschine

How do I connect my mic with maschine mk3 with logic pro..I'm getting no sound...who can help me

Best Answer

«1

Answers

  • Blindeddie
    Blindeddie U.S.A.Member Posts: 1,208 Pulse

    Are you using the MK3 as the audio Interface for Logic?

  • Smitha229
    Smitha229 Member Posts: 7 Sine
    edited March 8

    Yes I am....I'm just starting really don't know what to do...that what I wanna do if best what you think..I have the microphone plug to the mk3 but I might have the input wrong...I'm using blue too headphones

  • DIS-ONE
    DIS-ONE Philadelphia PAMember Posts: 21 Sine

    Do you have a audio interface??? And if you are plugging into the Maschine MK3/plus. You need your monitor input turned on to hear what’s going through it. But if you don’t have a audio interface. It’s best to invest into one.

  • Smitha229
    Smitha229 Member Posts: 7 Sine

    No I'm just using the maschine mk3...as the interface....I am trying it now...I'm just missing something simple might be what u mention....

  • jacqui brookes
    jacqui brookes Member Posts: 13 Sine

    Same here, used to be able to record a vocal on mk3, but now it doesn't work.

  • Kaiwan_NI
    Kaiwan_NI BerlinAdministrator Posts: 1,119 admin

    Hi @jacqui brookes did you recently update your OS or the software?

  • jacqui brookes
    jacqui brookes Member Posts: 13 Sine
    edited March 22

    Yes, my old iMac died on me, everything worked perfectly then, so now have Mac mini M1 big Sur and now can't record via line in or mic? Into Maschine 2. Thanks for reply, any help really appreciated .

  • Impermanence
    Impermanence Member Posts: 47 Tri

    In plug in mode the inputs don’t work in Maschine Mk3. In Standalone eveything is just fine.

    I manged to use Mk3 interface input for other instances of Logic X.

    My bet is, you need to take sound in from audio channel in Logic and route it to Maschine. I’ll look into it today.

  • Impermanence
    Impermanence Member Posts: 47 Tri

    No use. Didn't work.

  • Smitha229
    Smitha229 Member Posts: 7 Sine

    So what I need to do on standalone mode. It's a step I'm missing don't know what

  • Impermanence
    Impermanence Member Posts: 47 Tri

    Why is this tagged answered?

  • Blindeddie
    Blindeddie U.S.A.Member Posts: 1,208 Pulse

    Either you or a Moderator would be the only ones allowed to mark as answered, so if you did not, maybe a mod did in error.

  • Kaiwan_NI
    Kaiwan_NI BerlinAdministrator Posts: 1,119 admin

    @Smitha229 Can you double-check that the Mic Gain knob is turned up on the back of the hardware? I'm looping our expert in as well @Jeremy_NI do you have any advice on what the OP needs to check?

  • Kaiwan_NI
    Kaiwan_NI BerlinAdministrator Posts: 1,119 admin

    @jacqui brookes This is probably a different issue than the OP's since yours work before the upgrade. Could it be related to your mac's permission settings?

    MASCHINE 2 Does Not Receive an Audio Signal with macOS 10.14 (or higher)

  • Jeremy_NI
    Jeremy_NI BerlinCustomer Care Posts: 1,217 mod
    Answer ✓

    Hey @Smitha229 You need to activate the input here:

Back To Top