Boss RC300 midi not sending tempo/ clock to Maschine plus

Rauldaniel

Hello all, I have spent 2 days trying to figure out how to send the midi clock from rc300 to the Maschine plus.

I followed all tutorials but is not working.I tried with idi and usb câbles .

What I want to do is to set the tempo in the rc300 and so that it aligns automatically in the Maschine .

Find more posts tagged with

Accepted answers

Jeremy_NI

Have you tried to sync another device to your RC300?

All comments

LostInFoundation

You want to do it in that “direction” (from BOSS to Maschine) cause the first thing you do is recording a loop in RC?

I ask because probably it could be way easier to do the opposite (midi clock from Maschine to RC)

forget it, I see now RC 300 can only be the master

Rauldaniel

I play live, so I start by tapping the tempo in the rc300 that defines the tempo for that particular song I’m playing. Each song will have a different tempo.

I first record the guitar in the rc300 and then jump to add sounds in the Maschine . So tempos need to be the same .

LostInFoundation

To be sure…In Maschine+ you went to Settings - Midi page and selected Receive with the first knob and set the midi channel it receives to the same channel you selected in RC midi settings “Sys:MIDI Tx Ch”. Correct?

Rauldaniel

Yes

Midi receive, clock offset 0, midi input default, input device mspipimi1, midi change scene, trigger program change, source mspipimi1, channel 16.

Jeremy_NI

MIDI sync should work independently from MIDI channels, the MIDI clock signal usually transmits for all channels. What other options do you have in this box?

Can you set it to mspipimi1?

Not familiar with the RC 300 but is there a setting to turn MIDI clok or MIDI sync on or off? Is it on then?

6xes

i would start with testing the midi clock source... and making sure it is sending out a signal

run the test on a computer via audio interface that has midi 5din and then run a midi monitor to see you first are getting a clock signal... and test all the channels for good measure..

once your clock source is okay and working... trial and error with the maschine+ settings *shrugs

Rauldaniel

Question: Can you set it to mspipimi1?

Response: i can only set it to focus or none.

Question: Not familiar with the RC 300 but is there a setting to turn MIDI clok or MIDI sync on or off? Is it on then?

Response: Yes in RC300 you need to select internal as the midi clock so that is the one that sends to an external source.

Rauldaniel

https://community.native-instruments.com/discussion/comment/69892#Comment_69892

I will try this

Rauldaniel

https://community.native-instruments.com/discussion/comment/69886#Comment_69886

Question: Can you set it to mspipimi1?

Response: i can only set it to focus or none.

Question: Not familiar with the RC 300 but is there a setting to turn MIDI clok or MIDI sync on or off? Is it on then?

Response: Yes in RC300 you need to select internal as the midi clock so that is the one that sends to an external source.

Jeremy_NI

Have you tried to sync another device to your RC300?

DeepThumb

Hi, BTW: My Boss RC-500 Looper sends MIDI clock only when its looper is running. Therefore I can't use it as the clock master.

I would check whether the RC-300 behaves similarly.

Rauldaniel

So it worked one day and then it didn’t, not sure what I clicked to

Quick links

Unanswered questions