Maschine+ Power Bank guide
Comments
-
yes, but you’re missing the point.
Watts = Volts * Amps45 Watts = x * 5
45 / 5 = 9 volts
That’s how that math would work.
1 -
If you have a multimeter you could quickly test it.
That is what I did before plugging in my cable into my gear.
0 -
Like I've said repeatedly, I recommend a PD Trigger Cable that asks for a fixed 15 Volts, that's it, it's simple. I dont understand why you keep mentioning other voltages...
Like this:
or
Keep in mind sellers sometimes change their listing items on Amazon, so you always gotta double check.
Why would you use 9V on a device where the original power brick is 15V ?? AFAIK going lower than required is not dangerous like going way above, but the device might be unstable, crash, etc…
It might work because the power consumption is actually much lower than expected (probably to account for things connected to USB's that also consume power). I have a 12V cable and it does work but not sure how stable it is… Power consumption on computers can peak really high for short periods, I know they do when booting for example.
0 -
On the Maschine+ FAQ on Native Instruments own site, there's one asking if it can be powered with a battery, and the answer includes the comment "15 V (This must be met exactly)"
0
Categories
- All Categories
- 19 Welcome
- 1.5K Hangout
- 65 NI News
- 816 Tech Talks
- 4.2K Native Access
- 17K Komplete
- 2.1K Komplete General
- 4.4K Komplete Kontrol
- 5.9K Kontakt
- 1.6K Reaktor
- 389 Battery 4
- 866 Guitar Rig & FX
- 439 Massive X & Synths
- 1.3K Other Software & Hardware
- 5.9K Maschine
- 7.5K Traktor
- 7.5K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators