Cue mix is always on stream in OBS Studio
Hello community, since today my cue mix is always on stream to be heard. Master level when cue is active does not fail but the signal is transmitted anyway :someone may have an idea
Answers
-
We need a lot more information. I am guessing you're using a single laptop running both Traktor and OBS and you have some sort of audio routing internally. If so, perhaps share what you're using for internal routing and your Traktor config of audio output?
0 -
@ilove1981 Ok i will try my best . I'll take a few screenshots as best I can.
0 -
The S4 runs on a PC with which I also use for streaming. USB Audiointerace is the ELgato Wave xlr which I use for the microphone because of the 48 V phantom power,
0 -
since today my cue mix is always on stream to be heard.
Did it work before? Because I'm sure it was always like this.
OBS listens to all 4 channel (2x master, 2x cue) and downmixes it to stereo.
What I had to do was put a cable from S4 booth out into a s4 line in on the back. I called it the incest cable :)
1 -
Looks to me like monitor and master are swapped (master is set to headphones hence cue signal).
1 -
Exactly what I was about to say.
i will have to go and check but I thought OBS had advanced options to determine which channels it listens to, so you can ignore anything Traktor outputs on certain channels. Please, don't quote me on this though as I could well be wrong! I will check.
0 -
You can send/record to multiple channels.
0
Categories
- All Categories
- 19 Welcome
- 1.3K Hangout
- 59 NI News
- 708 Tech Talks
- 3.6K Native Access
- 15.2K Komplete
- 1.8K Komplete General
- 4K Komplete Kontrol
- 5.3K Kontakt
- 1.5K Reaktor
- 356 Battery 4
- 784 Guitar Rig & FX
- 403 Massive X & Synths
- 1.1K Other Software & Hardware
- 5.3K Maschine
- 6.7K Traktor
- 6.7K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators