Problem with CDJ 2000 Nexus 2

mlgfx
mlgfx Member Posts: 5 Member
edited October 22 in Traktor Software & Hardware

Hey guys,

I'm currently thinking about switching up the way I DJ and want to connect 2 CDJ 2000 NXS2 to my Macbook and control Traktor with them. I watched some guides to help me set everything up but I encountered a problem.

I connected both CDJs and used the Aggregator tool. After that I went into Traktor settings and there I only see 2 output options: Front Left and Front Right. This means that both CDJs output everything only on 1 Line instead of 2. How can I change this? I tried looking into the Audio MIDI app from my Macbook but can't seem to figure it out.

Any help is appreciated!

Tagged:

Best Answer

  • mlgfx
    mlgfx Member Posts: 5 Member
    Answer ✓
    https://community.native-instruments.com/discussion/comment/153997#Comment_153997

    I actually did but I still don't know why this works exactly.

    I connected both CDJs with a USB cable to my Macbook. And then I took another USB cable and connected it to the DJM 900NXS2. This WILL NOT WORK with a DJM 900.

    So you put the USB cable into the A or B port and then select it at the top of the the 2 channels you want to use (I always use the first 2 channels, otherwise I'd have to change the output in Traktor everytime). So you put the output on both channels on A/A or B/B - depending on which port you connected the cable with.

    Then select the output on the CDJs to Traktor and now it should work.

Answers

  • lord-carlos
    lord-carlos Member Posts: 3,590 Expert

    I never used CDJs, so maybe I'm missing something.

    You want to use the CDJs only as a midi controller, right? They will not play any files them self.

    If so, what has the audio out got to do with the CDJs? That would be the mixer / audio interfaces job.


    Or do you want to play tracks on the CDJs and use live input into tracktor for effects?

  • mlgfx
    mlgfx Member Posts: 5 Member
    https://community.native-instruments.com/discussion/comment/22103#Comment_22103

    Yes, I want to use them as midi controllers. They are both connected to a mixer but I cannot specify the audio output correctly as it only gives me the "Front Left" and "Front Right" option. That means that both outputs go through the same channel. It doesn't give me the option to put the output for the first CDJ independently from the second one

  • lord-carlos
    lord-carlos Member Posts: 3,590 Expert

    Ah sorry. I misunderstood. I did not know you wanted to use the CDJs itself as an audio device.

    Sounds like a Aggregator things. Yeah my experience is limited here. By bad, but I hope you find a solution.

  • Kaiwan_NI
    Kaiwan_NI Administrator Posts: 2,862 admin

    Hi @mlgfx can you share with us screenshots of your aggregated device and output routing setting?

  • mlgfx
    mlgfx Member Posts: 5 Member
    https://community.native-instruments.com/discussion/comment/22796#Comment_22796

    Sorry for the late reply but I'm only able to use the CDJs once a month

    I tried connecting them one by one, went to the Audio Midi Setup app to check the outputs and the weird thing is that one of them had 0 outputs and the other one 2

    IMG_0031.jpeg
    IMG_0030.jpeg


    Any ideas?

  • Kaiwan_NI
    Kaiwan_NI Administrator Posts: 2,862 admin
    edited August 2022

    Hi @mlgfx I've created a support ticket for you instead as we might need more info. You'll hear back from our support team by email.

    Btw if you haven't already, pls check this article out just in case:

    How to Use Two Pioneer CDJs for Audio Playback in TRAKTOR

    Pls keep us updated here once you find a solution!

  • MR BOK
    MR BOK Member Posts: 2 Newcomer

    Hello,

    Have you resolve this problem ?

    I have the same thing.

    The sound of the 2 CDJ go in only 1 line of my mixer (V10).

    I was configuring the output routing and the decks informations in traktor, but when I go with the agregator soft, the sound of the 2 CDJ is going in only 1 line of my mixer ….

    Please help me !

    thanks you !

  • mlgfx
    mlgfx Member Posts: 5 Member
    Answer ✓
    https://community.native-instruments.com/discussion/comment/153997#Comment_153997

    I actually did but I still don't know why this works exactly.

    I connected both CDJs with a USB cable to my Macbook. And then I took another USB cable and connected it to the DJM 900NXS2. This WILL NOT WORK with a DJM 900.

    So you put the USB cable into the A or B port and then select it at the top of the the 2 channels you want to use (I always use the first 2 channels, otherwise I'd have to change the output in Traktor everytime). So you put the output on both channels on A/A or B/B - depending on which port you connected the cable with.

    Then select the output on the CDJs to Traktor and now it should work.

  • lord-carlos
    lord-carlos Member Posts: 3,590 Expert
    https://community.native-instruments.com/discussion/comment/153997#Comment_153997

    If you have the v10 mixer, why not connect that one to traktor?

    And did you remember to select external mixing mode? Maybe take some screenshots of your traktor settings.

  • MR BOK
    MR BOK Member Posts: 2 Newcomer

    Hi !

    Thanks you for your feed back.

    @mlgfx I will try that to night

    @lord-carlos because I will not use this mixer all time : )) so I want to understand the connecting process

    But I will also try with the V10 to night

    Thx very much for your help

    👊

This discussion has been closed.
Back To Top

Categories