My Maschine plus is getting a signature error every time I try to use it in standalone mode.
Invalid Signature
File: Maschine-image-release-x86-congatec-mmclk1-
Path:/run/media/mmcblk0p1
Contact Support for more information.
What does this mean? How do I fix this?
My maschine plus is not working in stand alone mode.
Best Answer
-
If some of you are faced with a similar issue, or if your Maschine Plus is hanging at start or gets stuck on update, this is what you need to do:
1) Please download the file “system-reset-v2.nut” from the attachments in this post
2) Get the original SD-card from Maschine+ and insert it into the SD-card slot of your computer
3) Copy and paste the file system-reset-v2.nut to the root level of the SD card (do not place it in any subfolders)
4) Eject the SD-card and insert it into Maschine+
5) Once you see the screen that says “You are about to update Maschine. Press update to proceed”, hit “UPDATE”.
6) wait for the success message and hit “REBOOT”.
If you are still having problems even after these steps, please get in touch with our Maschine Plus specialists here: http://bit.ly/NIsupport_maschine
1
Answers
-
The operative part of the message is "Contact Support for more information." Since this is a user forum, you should submit a support ticket using the Maschine Support Wizard.
0 -
Did you try Reset?0
-
@Jeremy @ NI Did you see this error message before?
0 -
Hey Oliver,
I need to send you a file so I contacted you by email. Hopefully that works 🤞
0 -
Hey @Oliver-Hiei did you receive our emails ? Did it work out for you in the end ?
0 -
If some of you are faced with a similar issue, or if your Maschine Plus is hanging at start or gets stuck on update, this is what you need to do:
1) Please download the file “system-reset-v2.nut” from the attachments in this post
2) Get the original SD-card from Maschine+ and insert it into the SD-card slot of your computer
3) Copy and paste the file system-reset-v2.nut to the root level of the SD card (do not place it in any subfolders)
4) Eject the SD-card and insert it into Maschine+
5) Once you see the screen that says “You are about to update Maschine. Press update to proceed”, hit “UPDATE”.
6) wait for the success message and hit “REBOOT”.
If you are still having problems even after these steps, please get in touch with our Maschine Plus specialists here: http://bit.ly/NIsupport_maschine
1 -
if you are in guarantee send to Native quickly your Maschine +
If the Maschine are more 2 years she is dead and buy an other or pay the reparation and sending or go to garbage…
For a default by Native it’s shame but it’s the only way….
0 -
hello ,
I am too with a problem of machine stuck on startup. it happens when I install or uninstall expansion and shutdown.
I have tried using that file on the original SD card, but I never get the prompt in bullet number 5) You are about to update Maschine..
what am I doing wrong?
Y.
0 -
@nabulaer Please get in touch with our support here: http://bit.ly/NIsupport_maschine
0 -
system-reset-v2.nut
----Download ----- ????
0 -
Download it from the link given by Jeremy_NI
0
Categories
- All Categories
- 19 Welcome
- 1.4K Hangout
- 59 NI News
- 723 Tech Talks
- 3.8K Native Access
- 15.6K Komplete
- 1.9K Komplete General
- 4.1K Komplete Kontrol
- 5.4K Kontakt
- 1.5K Reaktor
- 360 Battery 4
- 803 Guitar Rig & FX
- 409 Massive X & Synths
- 1.2K Other Software & Hardware
- 5.4K Maschine
- 6.9K Traktor
- 6.9K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators