Then you ought to contact : Native instruments support for Native Access is here !
It might be a pain jumping through the hoops of troubleshooting but sending your computer to a shop will cost you if they can solve the problem..
Also , as far as I can see then you didn't state version of Native Access that you try to install , further more then some installations will require you not only to run all apps as an Admin they will also require you to make sure that you have removed the old installation properly. (e.g. by using the N.I: reg tool to remove both Native Access and NTKDaemon) then restart then try again with newest NA version.
However there are two basic problems, one is that prior it has been seen that some installations required a lot of scrubbing of leftovers of old installations to give a successful installation and the other is that also some installations have had user access issues so not even that helped. My point here is that even if you do want to give it a go to try to fix things then support might still be you best option though it might take long time waiting and a lot of work ! If I were sure that whatever would give you a fix I would tell you do this or that , but at this point in time I am not sure. And if there is any hidden access issues then it's sort of uphill.
Hi poorfellow , I’ve fixed it . I deleted it all, then reinstalled it again and did a Microsoft troubleshoot and it’s working fine now!!
I’ve got another question, I need a audio interface, I’m looking at the komplete audio 6 , I’ve got a arturia synth, a tb303 and my Maschine studio. Is this the sort of thing I need to run everything? Thanks
Thank you ! I will call off my request to D-One then , had no idea that you knew about Audio interfaces 😃
I'd go for a decent powered hub for your Maschine and the keyboard, something like a D-Link. I've got a couple of these and they're rock solid - DUB-H7 7-Port USB 2.0 Hub | D-Link UK (dlink.com) You can plug the audio interface directly into the PC or into the hub, either should work.
EDIT: You could also use a Novation Audiohub - these are a 2 line-in, 4 out interface with a built in 3-port USB hub, headphone socket. They're discontinued now, but you can still find them. They still work perfectly on Windows 11 with decent ASIO drivers, and MacOS Sonoma. There's no mic preamp, but for the line level from the TB303 they're ok. I use one with my laptop occasionally.
The Arturia Mini Keys is a MIDI controller and it'll connect to a USB port rather than an audio interface. It won't produce any sound unless it's used to control a software synth. The TB303 will run into one of the inputs of the A6 as they only have a mono output. So yes, an Audio 6 will work and give you future expansion as well as mic preamps. Two of the ins and outs are on S/PDIF so only work with digital gear that has co-axial digital ins/outs rather than TOSLINK.
Correct me if I am wrong , but if your Arturia is the "Arturia - MiniLab MkII - Portable MIDI Controller for Music Production" , does that not connect only by USB ? If so then how would connect that to anything but a computer ?
You can see all the Komplete Audio 6 inputs/outputs here : https://www.native-instruments.com/en/komplete-audio-6-quickstart/
The KA6 says that it can be used with Maschine so apparently no problem with that though I don't know the difference between Machine and Maschine Studio ! : https://www.native-instruments.com/en/komplete-audio-6-quickstart/setting-up-maschine/
KA6 also can be used with microphones including those requiring Phantom Power !
P.S. I have been unable to find a manual for the present version Komplete Audio 6 anywhere but I have found one for an older version of KA6. Please understand that I take no responsibility for any discrepancies , differences or errors in the manual I attach versus the present KA6 version. Also I do not work for N.I. and my opinions are my own !
This manual download is NOT N.I. supplied by N.I. it is my own personal download from a third-party internet site !
Thanks guys, basically I just want all my gear to be accessible without having to unplug something every time I use it? And yes you are correct it’s a usb port so will that connect straight to my computer? Problem is I only have two usb ports and one is for Maschine studio ( basically mk2) so I need to plug in some kind of audio interface for headphones etc . I might take a visit to my local dj superstore see what they suggest. Thanks for all your help . Cheers
Ok thanks I’ll have a look online
cheers