"Slice"-Option doesn`t show up when in sampling mode

Options
Locco
Locco Member Posts: 5 Newcomer
edited October 2024 in Maschine

Just bought a Maschine MK1 on ebay and when I take a loop from an expansion pack or any other wav. file i only have the option 'record' and 'edit'. (hardware and software)

Seems like this problem isnt that common since I found nothing on the internet about it.

I installed the driver twice, restartet my computer but it just wont show up.

Hope anyone could help me

Tagged:

Best Answer

  • jt maher
    jt maher Member Posts: 80 Newcomer
    Answer ✓

    Looks like your in Audio mode. Try switching to the Sampler.

    IMG_3157.jpeg


    Then click squiggly wav button. You should be able to see “Slice” now

    IMG_3158.jpeg


Answers

  • jt maher
    jt maher Member Posts: 80 Newcomer

    What version software are you using? Maschine 2 or 1

  • jt maher
    jt maher Member Posts: 80 Newcomer

    If your using software version 1.8

    unplug the controller and install again, make sure the controller is not plugged in any time you install or update the software!

  • Locco
    Locco Member Posts: 5 Newcomer

    Hey thanks for helping!

    Im using Maschine 2 (2.17.4)

    Uninstalled all Maschine programms and after installing it new via Native Access (controller unpluged) the problem is still there. And after all that it still opens up the older project i was working on, so maybe i didnt uninstall ALL or maybe not the right way? I'll try that again...

    2023-11-26 10_57_25-Window.png


  • Locco
    Locco Member Posts: 5 Newcomer

    Ok now it works with other samples i created in FL Studio (wav.) but the samples from the expansion packs from NI still doesn't work. Kinda frustrating

  • jt maher
    jt maher Member Posts: 80 Newcomer
    Answer ✓

    Looks like your in Audio mode. Try switching to the Sampler.

    IMG_3157.jpeg


    Then click squiggly wav button. You should be able to see “Slice” now

    IMG_3158.jpeg


  • Locco
    Locco Member Posts: 5 Newcomer

    Awesome, thank you so much! Is this also possible directly from the controller?

  • jt maher
    jt maher Member Posts: 80 Newcomer

    On the MK1 yes….”Sampling” button next to “Browse”…Upper left corner of the device.

  • Locco
    Locco Member Posts: 5 Newcomer

    No I mean if I can switch the sample from audio mode to sampler mode within the 'sampling' section

This discussion has been closed.
Back To Top

Categories