Using Roland DP-10 with Kontrol S61 Mk3

Dobrun · February 12

Hi - Ive been trying everything to get a working DP-10 sustain pedal to work with Komplete Control (standalone) and I have failed. I have tried switch/continous combinations (including the hardward swith on the DP-10), checked MIDI to 64, tried the "reverse" calibration method (ie: ups id down, and vice versa) … all to no avail!! Is there (please) anyone who has made this work that can give me a simple step guide - I'm 3 hours into trying to sort it out! Its probably something simple. The DP-10 works perfectly with my Fantom 6, so its clearly a MIDI settings issue? Thanks in advance to any kind soul who could help ..Nick

nico5 · February 13

I'm running my DP-10 with the switch on the pedal set to "Continuous", plugged into the Sustain Pedal socket of my MK3 (with current firmware version).

And the Sustain Pedal settings on the MK3 configured as follows:

Mode: Continuous
Invert Off
Swap: Tip
Type: Control Change
Channel: 1
Number: 64
From: 0
To: 127

And that works fine for me.

nico5 · February 13

I'm running my DP-10 with the switch on the pedal set to "Continuous", plugged into the Sustain Pedal socket of my MK3 (with current firmware version).

And the Sustain Pedal settings on the MK3 configured as follows:

Mode: Continuous
Invert Off
Swap: Tip
Type: Control Change
Channel: 1
Number: 64
From: 0
To: 127

And that works fine for me.

Dobrun · February 13

Thanks Nico - thank you for taking the time to help out! I'll give it a try later this morning!!

Dobrun · February 13

Perfect - issue sorted - very many thanks Nico!!

Using Roland DP-10 with Kontrol S61 Mk3

Best Answer

Answers

Categories