Why is this the only thing loading and who can help fix it??

YabYum68
YabYum68 Member Posts: 10 Newcomer

I open Maschine as administrator and the only page loading is the preference page!!! Why?? How can I fix this? I have upgraded the computer to windows 11 so every upgrade has been done

Best Answers

  • darkwaves
    darkwaves Member Posts: 433 Guru
    Answer โœ“

    what's your screen resolution?

    That window pops up to let you choose your audio interface at first load. OK/Cancel is at the bottom but being covered by your task bar. Move the window up. If you can't; then hide your task bar or change your resolution.

    This is actually a pretty common question; though normally from people using very weak laptops with low resolution (i.e. old school netbooks)

  • darkwaves
    darkwaves Member Posts: 433 Guru
    Answer โœ“

    lol. I assumed you don't actually have that issue since you're taking a picture of an external monitor. It really just looks like you need to drag the window up. But if you're stuck with 1366x768 resolution or something then hiding the taskbar might give you just enough room to click ok.

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,065 mod
    edited December 3 Answer โœ“

    That was the "problem"? Your screen was too small and you couldn't see the "Close" button? ๐Ÿ™„ ๐Ÿ˜‚๐Ÿคช

    Anyway, @darkwaves gave you a good tip, one that you will find useful many times on many cases,
    but, in this case i can give you an event easier solution:

    Click the "Esc" button in your keyboard! ๐Ÿ˜‰

    __________________________________________________

    EDIT: I just saw your monitor againโ€ฆ. dude, you must change your screen resolution to at least 1920x1080, or to whatever resolution your Windows tagged as "Recommended"!

Answers

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,065 mod

    I doesn't make any sense as you described it, please make a screen shot of what you see and post it.

    Most probably, it asks you the obvious: To select your default Audio device and driver and your Midi inputs and outputsโ€ฆ

  • YabYum68
    YabYum68 Member Posts: 10 Newcomer

    I will try to post the picture but if you know what the preference page looks like โ€œ and Iโ€™m sure you doโ€, then thatโ€™s all that will load after Maschine runs its scans.. My audio device and midi instruments be listed just as I put them. Thanks for your response and I will try to load a picture of it

  • YabYum68
    YabYum68 Member Posts: 10 Newcomer

    This is the only thing that will load. I canโ€™t record like thisโ€ฆ๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜ณ๐Ÿ˜ญ๐Ÿ˜ญ

  • darkwaves
    darkwaves Member Posts: 433 Guru
    Answer โœ“

    what's your screen resolution?

    That window pops up to let you choose your audio interface at first load. OK/Cancel is at the bottom but being covered by your task bar. Move the window up. If you can't; then hide your task bar or change your resolution.

    This is actually a pretty common question; though normally from people using very weak laptops with low resolution (i.e. old school netbooks)

  • YabYum68
    YabYum68 Member Posts: 10 Newcomer

    Ahhhh man โ€œdark wavesโ€, you didnโ€™t have to throw shade on my old school laptop man!!! ๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚ Bruh, thanks for your post. Iโ€™m going to try it and see what happens.

  • darkwaves
    darkwaves Member Posts: 433 Guru
    Answer โœ“

    lol. I assumed you don't actually have that issue since you're taking a picture of an external monitor. It really just looks like you need to drag the window up. But if you're stuck with 1366x768 resolution or something then hiding the taskbar might give you just enough room to click ok.

  • YabYum68
    YabYum68 Member Posts: 10 Newcomer

    DARKWAVES, either you are a genius or Iโ€™m just dumbโ€ฆ Donโ€™t you answer that!! I hope nobody else does either๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚๐Ÿ˜‚ It worked.

  • Sunborn
    Sunborn NKS User Library Mod Posts: 3,065 mod
    edited December 3 Answer โœ“

    That was the "problem"? Your screen was too small and you couldn't see the "Close" button? ๐Ÿ™„ ๐Ÿ˜‚๐Ÿคช

    Anyway, @darkwaves gave you a good tip, one that you will find useful many times on many cases,
    but, in this case i can give you an event easier solution:

    Click the "Esc" button in your keyboard! ๐Ÿ˜‰

    __________________________________________________

    EDIT: I just saw your monitor againโ€ฆ. dude, you must change your screen resolution to at least 1920x1080, or to whatever resolution your Windows tagged as "Recommended"!

  • YabYum68
    YabYum68 Member Posts: 10 Newcomer

    Yep Sunborn, that was the problem and have been the problem for weeks.. Now here you go with the Esc button trick! ๐Ÿ˜‚๐Ÿ˜‚ Guys remember, Iโ€™m new to the neighborhood, be nice to your neighbor and try not to laugh at them (me) for not using the simplest solution that was right in front of me the whole time. I never really had a problem at all did I??๐Ÿ˜‚๐Ÿ˜‚ Wow we man.

  • YabYum68
    YabYum68 Member Posts: 10 Newcomer

    Oh yeah, and I changed the resolution ASAP! I glued it down so that no changes can be made

Back To Top