S4MK3 & S3: Community Performance MOD (qml coding)
Comments
-
For better visibility yes. It is usual thing on DJ gear that 30s to track end LEDs start blinking slowly in white and 15s quickly in red. I'm surprised that NI doesn't implement this feature. Maybe because want to be different from others? Who knows.
0 -
Whatever the design philosophy of Traktor, something is blinking: stripe in S4 screen and stripe in GUI. You can vary the number of seconds left when it starts.
I put this on my list.
1 -
not sure why my response wanished but hey ho.
OK, I think that is good to have visual feedback other than on small screen.
It's standard on DJ gear to blinking slowly 30s in white and 15s fast in red before end of the track.
1 -
I will attempt to incorporate a working version in the next beta.
2 -
Thank you. Sending ☕️
2 -
Have a go:
Mind you, this is still a beta. It's stable, but the Remix/Stem channel controls of the previous beta version is still in development (working, but not quite there yet). Track end warning now also blinks jogwheel LED. It's only single stage, but you can set the track end range in seconds in Preferences. TT and JOG buttons will also blink, which sadly can't be avoided. I can adjust the frequency of the blink, which is now once every 500ms. I've not yet put in a custom toggle to make the blinking optional. Happy to hear your feedback.
🦋
1 -
Also, thanks for everybody's support. Helps a lot and keeps me going. ❤️
1 -
Thank you sir. I will test when I get back from work and let you know.
1 -
Another variant (blinking red, not so jarring as black).
This has a few new things (i'll make a description later). Blinking now optional, toggle it by using SHIFT + MixerFX-Button 3.
1 -
Overview of all recent beta changes (1 to 4 included)
Update for Version 9 Beta 4 (WiP):
New Stem Controls:
- SHIFT+STEM will let you switch between FX and Stem controls. This is just a provisionary toggle i plan to refine.
- FX Knobs control Stem channel Volume/Filter as Superknobs: Turn left to control Volume, turn right to control High-Pass Filter.
- FX Buttons control Stem channel FX Send.
- Soft takeover both for FX parameters and Stem parameters. FX button LED's will blink dimly if you have to turn the knob down to reach the software parameter. It will blink brightly if you have to turn the knob up.
New Remix Controls:
- SHIFT+SAMPLES will let you switch between FX and Remix controls. This is also just a provisionary toggle i plan to refine.
- FX Knobs control Remix channel Volume/Filter as Superknobs: Turn left to control Volume, turn right to control High-Pass Filter.
- FX Buttons control Remix channel FX Send.
- Soft takeover both for FX parameters and Remix parameters. FX button LED's will blink dimly if you have to turn the knob down to reach the software parameter. It will blink brightly if you have to turn the knob up.
New Deck Controls:
- Track End Warning Feedback: LED ring of jogwheel will blink red. Can be toggled using SHIFT+MixerFX button 3. MixerFX button 4 alone will now cycle screen popup length.
New Channel Controls:
- Cue Monitor Isolation. When engaging Cue Monitor using the channel 🎧CUE button, all other channel's Cue Monitor will be disengaged. Multiple channels can still be selected by holding down SHIFT.
So, what's stil in the works?
- A more elegant toggle and LED feedback for stem/remix overlay.
- Remix overlay when in PadMode.Remix while on the alternate deck.
- Remix deck cell capture functionality.
🦋
1 -
for the weekend I've decided to implement the remix things from you for my S3.😋
I think the superknobs will be great.😎FX Buttons control Remix channel FX Send.
FX Buttons control Stem channel FX Send.
here i still have to think about whether to do it with a switch or with the pads i don't have a plan yet^^
1 -
At first: great to see, that there are ppl working with an on this controller. I love the S4 b- but after so many years with so many improvements…the controler isn't state of the art anymore (without making changes like this here).
My question:
…is there a git repo (or something else) where all changes of versions have been listed?
A Forum thread with nearly 50 sites makes it anything but clear…0 -
Nope. Page 1 has the complete set of changes; but to see each individual update, someone has to go through the 47 pages and compile a list of changes per release.
I am curious. Why do you want to see which version added particular features? If you are looking for a version containing only a particular set of changes, you may be able to instead use the latest version and use the custom toggles to deactivate those changes you don't need.
1 -
@Sûlherokhh I really love this mod!!! What a great work! I'm also testing now the new Beta5 with TP4.2.
Before, I had Z2, and I loved it! But it was time to change to a controller…. What I'm missing is one feature I had on Z2, but not for S4MK3 now.
By pressing Shift and changing on of the equalizer knobs, the change was not active yet, so nobody could hear it. As soon as I release the shift button, the changes are hearable.
Is used it quite often to prepare changes of beats.
Could this also be a part of that mod? Or is this something I need to manage with mappings?
0 -
That's a special function only the Z2 has. It's not accessible, sadly.
0
Categories
- All Categories
- 18 Welcome
- 1.6K Hangout
- 67 NI News
- 876 Tech Talks
- 4.5K Native Access
- 17.4K Komplete
- 2.2K Komplete General
- 4.7K Komplete Kontrol
- 6.2K Kontakt
- 1.1K Reaktor
- 404 Battery 4
- 906 Guitar Rig & FX
- 459 Massive X & Synths
- 1.5K Other Software & Hardware
- 6.3K Maschine
- 8K Traktor
- 8K Traktor Software & Hardware
- Check out everything you can do
- Create an account
- See member benefits
- Answer questions
- Ask the community
- See product news
- Connect with creators