How do you route the output channels in session percussion

@1djbyrd
@1djbyrd Member Posts: 1 Newcomer
edited October 2024 in Kontakt

How do you route the output channels in session percussion

Answers

  • Milos
    Milos Member Posts: 2,021 Guru

    Here is how you do it.

    First, you need to close the Session percussionist, then click on the View, then Outputs, create 5 separate outputs, then open Session Percussionist again, then click on the mixer, then click on the Main button.

    That instrument doesn't show the names of the outputs, it only says Out 1, Out 2, depends on how many output channels you have.

    Here is a screenshot.

    ROMO.png

    Let me know if it helped or if you need more info.

  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    It appears that routing the output is not saved. Everytime I change a preset, the outputs are back on "main". Anybody experiencing the same problem or maybe even know the anwer? I'm using an M1 mac.
    Cheers!
  • Milos
    Milos Member Posts: 2,021 Guru

    That is strange...

    Which DAW do you use?

  • Milos
    Milos Member Posts: 2,021 Guru

    And btw, could you please screenshot the issue, Koekhapper?

  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    I'm using Logic Pro X and just upgraded to the newest (10.8). I can send screenshots later this week, not in right now. Thanks a lot by the way
  • Milos
    Milos Member Posts: 2,021 Guru

    Sure thing.

    Because when I saw your previous comment here today, I experimented with saving a custom Session Percussionist sample with custom outputs, and when I loaded the sample, everything was okay.

    Maybe you need to give your sample a name or something?

    Either that, or it is an OS or a DAW issue?

    Just my speculations.

  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    So this is my routing, but if I change the preset in the left corner from "Shift me" to, for instance "Small Combo", the routing is gone and all faders go to MAIN (see next screenshot)
  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    See screenshot
  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    When I go back to the preset "Shift me", all routing is stil gone and all faders go to MAIN.
  • Milos
    Milos Member Posts: 2,021 Guru

    Hmm...maybe I don't know how to solve this one...

    For my DAW (Cakewalk), I had no issues with saving custom presets for Percussionist.

  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    Like you said, maybe it's the DAW/M1. But it is quite strange. Just now I made a snap shot template, which brings me back to my routing. But still I can't scroll through the preset without loosing the routing. Tried to lock the mixer, but it does not help...
  • Koekhapper
    Koekhapper Member Posts: 7 Newcomer
    Tried routing NI West Africa. Same problem
  • Milos
    Milos Member Posts: 2,021 Guru

    Well, I tried my best...

    Maybe @Jeremy_NI can help.

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 13,833 mod

    @Koekhapper Have you followed these steps? How to Route KONTAKT to Multiple Outputs in Logic Pro X

    Also make sure that both Kontakt and Logic have full disk access: How to Enable Full Disk Access on macOS

This discussion has been closed.
Back To Top

Categories