Retrigger scene to start from the begining - Maschine Plus

Dimitar
Dimitar Member Posts: 6 Sine
edited April 4 in Maschine

Hi ,

I saw that in the software need to select "retriger" in order to make possible starting the next selectes scene from the begginng. I can't find this retriger option in the Mashine Plus. Please if someone has an idea

Tagged:

Best Answer

  • ozon
    ozon SwitzerlandMember Posts: 347 Saw
    Answer ✓

    6.8. Performing with Scenes and Sections

    MASCHINE+ provides you with settings to fine-tune the timing of the jump between the Scenes and Sections:

    • The Perform Grid lets you quantize the Scene transitions: You can choose the point at which the playback will leave the current Scene (Ideas view) or Section (Song view). For example, you might not want a newly selected loop to fire off immediately, you might want it to wait until the next bar line. The available quantization values are: one bar, one-half note, one-quarter note, one-eighth note, one-sixteenth note, the whole Scene/Section, and Off. If you choose Off, the Scene/Section change will be performed immediately after you select the next loop.

    • The Retrigger setting lets you decide where the next loop will start:

    • If Retrigger is activated, the next Section (Ideas view) or Section (Song view) that is selected will be forced to play from the start. This is useful if you always want your Scenes or Sections to play from the beginning regardless of what’s happening elsewhere in the music.

    • If Retrigger is deacrivated (default setting), the next Scene or Section that is selected will play from the same offset to the beginning: for example, leaving the current Section on beat 3 will cause the new Section to start playing on its beat 3. This ensures that the global groove of your track is not interrupted.

    6.8.1. Jumping between Scenes and Sections

    In Ideas view the Perform Grid and the Retrigger control the setting for the jump between Scenes and in Song view it sets the grid for the jump between Sections.

    To set the Perform Grid and the Retrigger settings:

    1. Press SHIFT + IDEAS then press Button 1 or 2 to select Ideas view or Song View.

    2. PressSHIFT+FOLLOW(Grid)toenterGridmode(orpinitbypressingSHIFT+FOLLOW(Grid) then Button 1).

    3. Press Button 2 to select PERFORM.

    4. Press a pad to select the desired value, for example, pad 9 (for 1/4, a quarter note).

    → The next time you select a new Scene/Section or loop range, the switch will happen on the next quarter note.

    Adjusting the Scene Retrigger Setting

    To adjust the Scene Retrigger setting:

    1. Press SHIFT + IDEAS (Song) then press Button 1 to select Ideas view.

    2. Press SCENE (Section) to enter Scene mode (or pin it by pressing SCENE + Button 1).

    3. At the bottom left corner of the left display, you see the current RETRIGGER value (Off by default).

    4. Turn Knob 1 to select On.

    → The next time you select a new Scene or loop range, it will start from the beginning.

    Adjusting the Section Retrigger Setting

    To adjust the Section Retrigger setting:

    1. Press SHIFT + IDEAS (Song) then press Button 2 to select Song view.

    2. Press SCENE to enter Section mode (or pin it by pressing SCENE + Button 1).

    3. Press the Right Page button to access page 2.

    4. At the bottom left corner of the left display you see the current RETRIGGER value (Off bydefault).

    5. Turn Knob 1 to select On.

    → The next time you select a new Section or loop range, it will start from the beginning.

Answers

  • ozon
    ozon SwitzerlandMember Posts: 347 Saw
    Answer ✓

    6.8. Performing with Scenes and Sections

    MASCHINE+ provides you with settings to fine-tune the timing of the jump between the Scenes and Sections:

    • The Perform Grid lets you quantize the Scene transitions: You can choose the point at which the playback will leave the current Scene (Ideas view) or Section (Song view). For example, you might not want a newly selected loop to fire off immediately, you might want it to wait until the next bar line. The available quantization values are: one bar, one-half note, one-quarter note, one-eighth note, one-sixteenth note, the whole Scene/Section, and Off. If you choose Off, the Scene/Section change will be performed immediately after you select the next loop.

    • The Retrigger setting lets you decide where the next loop will start:

    • If Retrigger is activated, the next Section (Ideas view) or Section (Song view) that is selected will be forced to play from the start. This is useful if you always want your Scenes or Sections to play from the beginning regardless of what’s happening elsewhere in the music.

    • If Retrigger is deacrivated (default setting), the next Scene or Section that is selected will play from the same offset to the beginning: for example, leaving the current Section on beat 3 will cause the new Section to start playing on its beat 3. This ensures that the global groove of your track is not interrupted.

    6.8.1. Jumping between Scenes and Sections

    In Ideas view the Perform Grid and the Retrigger control the setting for the jump between Scenes and in Song view it sets the grid for the jump between Sections.

    To set the Perform Grid and the Retrigger settings:

    1. Press SHIFT + IDEAS then press Button 1 or 2 to select Ideas view or Song View.

    2. PressSHIFT+FOLLOW(Grid)toenterGridmode(orpinitbypressingSHIFT+FOLLOW(Grid) then Button 1).

    3. Press Button 2 to select PERFORM.

    4. Press a pad to select the desired value, for example, pad 9 (for 1/4, a quarter note).

    → The next time you select a new Scene/Section or loop range, the switch will happen on the next quarter note.

    Adjusting the Scene Retrigger Setting

    To adjust the Scene Retrigger setting:

    1. Press SHIFT + IDEAS (Song) then press Button 1 to select Ideas view.

    2. Press SCENE (Section) to enter Scene mode (or pin it by pressing SCENE + Button 1).

    3. At the bottom left corner of the left display, you see the current RETRIGGER value (Off by default).

    4. Turn Knob 1 to select On.

    → The next time you select a new Scene or loop range, it will start from the beginning.

    Adjusting the Section Retrigger Setting

    To adjust the Section Retrigger setting:

    1. Press SHIFT + IDEAS (Song) then press Button 2 to select Song view.

    2. Press SCENE to enter Section mode (or pin it by pressing SCENE + Button 1).

    3. Press the Right Page button to access page 2.

    4. At the bottom left corner of the left display you see the current RETRIGGER value (Off bydefault).

    5. Turn Knob 1 to select On.

    → The next time you select a new Section or loop range, it will start from the beginning.

  • Dimitar
    Dimitar Member Posts: 6 Sine

    Great , thank you so much!

Back To Top