Maschine2 glitch

Whenever I have the open last project option checked the project loaded scale setting is edited. The project in question was a imported iMaschine project. Don't know if that has something to do with it since I turned it off while working on that project.

Wondering if someone has experienced the same issue. Not a big deal since I put the Root note in the project names but worth a mention.

Find more posts tagged with

Maschine 2 SW

Accepted answers

All comments

LostInFoundation

Could you please elaborate a little bit more? Scale setting is edited…in which way? It happens only with one project or all the projects loaded since you closed Maschine using them? And specially about iMaschine being involved

CRS

I do apologize. In keyboard mode. There are 3 options. (Root Note - Scale Bank - Scale). When I closed the project The scale was set to Major Pent. When I opened the project and started to play I noticed something was off pitch wise. Checked all the keyboard mode settings and noticed that the scale had changed to W-H Dim. Since I had just worked on the project I knew that was wrong. I knew it was E Major Pent (confirmed with my notes on the project). The scaled had changed from Major Pent to H-W Dim.

I made the correction continued to work on the project. Next time I opened the project the scale had changed again. This has not occurred on other projects. This one was imported from Imaschine. Not sure if it is related. I did replace the project after saving it in another folder. Finally, I deleted the older version and saved the new one in its place. The project no longer has the issue. This usually resolves any strange glitches I have with maschine sw.

Krizz22

@CRS i have the same issue, when i change from group and return to the previous group I found that many times the scale is set to W-H-Dim, also when i open the project is set to that scale, I dont know, whats happening. did you solve it? or it's a glitch that has not been solved?

Peter Harris

I have the same Scale problem, it's just a bug I think

CRS

I believe thist happens when you use an external midi device that has built in scale system. In my case I believe it was the roli blocks. Basically had to decide which I was going to use built in or roli's scales. Not sure hope the extra info helps.

Quick links

Unanswered questions