Guitar Rig Crashes When Using USB Mic

Options
buddyholly1955
buddyholly1955 Member Posts: 4 Newcomer
edited May 2023 in Guitar Rig & FX

I have always used Guitar Rig 5 with an iD14 interface and Shure SM7B mic. I never had any issues selecting the driver/interface in the audio settings to record before.

However, I recently switched to a Shure MV7, that is a direct USB mic that no longer requires an interface. When I try to select the driver in the audio settings menu, it crashes and says this...

Screenshot 2023-04-02 154850.png


Best Answer

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,965 mod
    Answer ✓
    Options

    No news from you for a while. We’re closing this thread now. If you still need assistance on that topic, please get in touch here:  https://bit.ly/NISupport_GR

Answers

  • David Das
    David Das Member Posts: 10 Member
    Options

    This would almost certainly be a Shure issue (with the MV7 drivers) not an NI issue. Make sure you're on the latest Shure drivers (https://www.shure.com/en-US/support/downloads/software-firmware-archive/mv7) and if you are, drop Shure a line and ask them.

  • buddyholly1955
    buddyholly1955 Member Posts: 4 Newcomer
    Options
    https://community.native-instruments.com/discussion/comment/61527#Comment_61527

    Thanks, but this is very unlikely. Shure delivers their drivers through their ShurePlus desktop app. And it pushes down all the latest downloads (including the most up-to-date firmware), which I already have.

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,965 mod
    Options

    @buddyholly1955 Guitar RIg requires an audio device that has an input AND an output. I imagine that the MV7 does not have an output but only an input. The problem might come from that. On Mac it would be an easy thing to create an aggregate device but on Windows it's a little bit tricky. I think programs like Voicemeeter can do that:

    https://vb-audio.com/Voicemeeter/


  • buddyholly1955
    buddyholly1955 Member Posts: 4 Newcomer
    Options

    That was a good suggestion about the both inputs. However, it does have an output source (via an on board mic jack). So it does read in the control panel of Windows 10 as having a playback and recording option. Unless Guitar Rig only recognizes quarter inch line input/outputs.

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,965 mod
    Options

    Ok, does Shure offer an ASIO driver for that microphone / interface?

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 9,965 mod
    Answer ✓
    Options

    No news from you for a while. We’re closing this thread now. If you still need assistance on that topic, please get in touch here:  https://bit.ly/NISupport_GR

This discussion has been closed.
Back To Top

Categories