Can't sample/hear any external Audio plugged into Line In

Fritten · April 16

Hey folks,

I recently purchased a second hand M+ in a very good state and want to learn things on it. I love that insturment so far, but got issues when I tried to start to sample from external devices.

My problem is: M+ doesn't show me any signal in Sampler in any mode. I tried any Input as Stereo and Mono, made different settings in Settings→Audio→Input Routings, turned the gain to 'max', and more. Nothing seems to help for getting a signal from the Line In plugs.

I wanted to sample stuff out of my MC 707 via MC's Mix Out. I also tried the phones out into Mic In - There is no Input singal at all.

So, what am I missing?

Would love to hear from you, that it a problem with my settings and not a hardware error.

Fritten · April 16

It's a Windows 11 computer.

I don't know what I changed, but now it works! oO

I had the device at a friends and we tried without success. Now I came home, plugged everything - it did not work. Then I put a TRS-Klinke into the Mic In and the other plug to my smarthphone via USB-C-adaptor - still no success.

When I eventually plugged in the micro again it surprisingly worked!

So, tbh I feel a little bit ashamed because of I cannot say how and why it now works, but also extremely relieved about that fact.

Thanks @ALDREAD and @PK The DJ for gettin in my trouble and trying to help me!

ALDREAD · April 16

https://community.native-instruments.com/discussion/44475/cant-sample-hear-any-external-audio-plugged-into-line-in

it’s been a while since I used the + , have you setup the input at sound/pad stage , select sound /channel / audio/input

FYI if you didn’t know , you can use the mc over usb , if you put the mc in generic driver mode

Fritten · April 16

Thx for your answer.

As I'm noobie at M+ I can't really follow your suggestions as they're very short.. Did not find the 'sound /channel / audio/input' section. Could you tell me where to find that?

Besides I tried also to get the MC via USB running and failed to setup the things so they work.

Thought the Maschine would be a little easier to setup especially the audio in

ALDREAD · April 16

https://community.native-instruments.com/discussion/comment/222173#Comment_222173

tbh , I’m not sure that makes a difference to sampling , that’s more for playing the audio live through the channel

Anyway I’ll see if I can find some videos on you tube , most of them are for the software and mk3

Have you switched monitor on ? , its on page 2 of the sampler window

Fritten · April 16

Yea, I also wanted first to play audio live through the channel which also did not work for me.

I switched monitor to 'on' - still no signal.

Of course I searched YouTube before asking here, but did not find a proper vod. So maybe You are successful.

ALDREAD · April 16

https://community.native-instruments.com/discussion/comment/222181#Comment_222181

this video shows it on the mk3 . What outputs on the mc 707 are you using , the main outputs ?

https://www.youtube.com/watch?v=QiAJPICuStc

Fritten · April 16

Yes, I use the Mixout of MC with 2 x Klinke which go in the Line In of M+

I wonder if maybe my M+ is defect.

ALDREAD · April 16

https://community.native-instruments.com/discussion/comment/222189#Comment_222189

what happens if you connect to a computer does it act as an audio interface

Fritten · April 16

Yes, but only if i switch to controller mode. Then I can hear sounds via USB..

PK The DJ · April 16

Did you confirm that when using via USB with Maschine software, the M+ input jacks can be used to record a sample?

Fritten · April 16

No, that did not work.

ALDREAD · April 16

https://community.native-instruments.com/discussion/comment/222229#Comment_222229

what computer , if it’s Mac don’t forget to grant maschine access to the microphone in privacy and security

Then in maschine settings check the inputs are set to 1: L 2:R

Fritten · April 16

It's a Windows 11 computer.

I don't know what I changed, but now it works! oO

I had the device at a friends and we tried without success. Now I came home, plugged everything - it did not work. Then I put a TRS-Klinke into the Mic In and the other plug to my smarthphone via USB-C-adaptor - still no success.

When I eventually plugged in the micro again it surprisingly worked!

So, tbh I feel a little bit ashamed because of I cannot say how and why it now works, but also extremely relieved about that fact.

Thanks @ALDREAD and @PK The DJ for gettin in my trouble and trying to help me!

ALDREAD · April 16

https://community.native-instruments.com/discussion/comment/222270#Comment_222270

maybe rebooting helped , I know that sometimes the midi port don’t show , and you have to reboot , but with the midi cable disconnected , and it reappears

PK The DJ · April 16

That's good news - now you can install that nice new update. 👍️

Can't sample/hear any external Audio plugged into Line In

Best Answer

Answers

Categories