After update Mac OS 15.4

Chris2025
Chris2025 Member Posts: 6 Member
in Komplete Kontrol

Hi,

is it possible that the Komplete Kontrol MK2 firmware 0.5.9. (from 20219) didn't work well with macOs Sequoia 15.4 ?

I use Logic Pro and Komplete Kontrol as Plugin. I had a perfect workflow before. I started record session from the MK 2 49 - everything worked perfect. After the Mac OS Update 15.4. the MK2 doesn´t work anymore in the way I used before. For example the transport buttons ( Stop/ Play / Record ) make now noise - for example - when I press the button play on the controller MK2 S 49, then it produce a noise from the loaded instrument.

Is it probably a compability Problem with the firmware( last update 2019) and macOs Sequoia 15.4 ?

Thanks

Chris

Best Answers

  • mykejb
    mykejb Moderator Posts: 2,427 mod
    Answer ✓

    If by noise you mean a note it sounds like the KK DAW output is being routed to the MIDI instruments rather than being setup as a control surface. Check that the routing in Logic hasn't changed is a good place to start.

  • PoorFellow
    PoorFellow Moderator Posts: 6,530 mod
    Answer ✓
    https://community.native-instruments.com/discussion/44385/after-update-mac-os-15-4

    Have you tried removing the keyboard from the list of midi devices and then add it again ? And then maybe re-setup with your DAW ?

  • Jorge H C
    Jorge H C Member Posts: 11 Member
    Answer ✓

    I founded
    I found when updating to Sequoia that Apple now requires many apps and processes to be added to the Local Network for them to function correctly and this seems to include NIHostIntegrationAgent as well as most DAWS, and things like iLok. (It did also ask me to add NTKDaemon but it looks like that is not required)

    So if anyone is having problems with NI hardware or Native Access on Sequoia you need to enable this and don't discuss the popup asking for local network access (at least for NIHostIntegrationAgent). Apps requiring access should initiate a system popup asking for access, however it seems MacOs only adds items to the panel below when they attempt to access the local network, so if they are not doing that you won't get the popup. Once they have asked to be added though they appear in that panel and then you can then toggle the on/off switch.

  • Chris2025
    Chris2025 Member Posts: 6 Member
    Answer ✓

    Okay now it is solved.

    I also allowed

    the NTK Daemon access to the hard drive. After installing the Controller setup for the MK2 S 49 - everything works like before !!!

    Bildschirmfoto 2025-04-13 um 14.10.39.png

    Thank you all for finding the way to fix this problem!

Answers

  • mykejb
    mykejb Moderator Posts: 2,427 mod
    Answer ✓

    If by noise you mean a note it sounds like the KK DAW output is being routed to the MIDI instruments rather than being setup as a control surface. Check that the routing in Logic hasn't changed is a good place to start.

  • Chris2025
    Chris2025 Member Posts: 6 Member

    Hi,

    thank you for the fast response .

    "output is being routed to the MIDI instruments rather than being setup as a control surface " exactly that is happen.

    I checked the option controller setup but the mk2 react not in the way I want.

    Bildschirmfoto 2025-04-13 um 10.49.46.png
  • Chris2025
    Chris2025 Member Posts: 6 Member

    Hi tried to setup the transport button in logic over "learning" option. that worked. but the workflow is not the same after the OS Update…..anyway.

  • Chris2025
    Chris2025 Member Posts: 6 Member

    But also the loading of any midi instrument from the Controller not work with a) Komplete Kontrol and b) Logic Pro……..

    because of that I think maybe the firmware is not compatible to the new MacOS ??

  • PoorFellow
    PoorFellow Moderator Posts: 6,530 mod
    Answer ✓
    https://community.native-instruments.com/discussion/44385/after-update-mac-os-15-4

    Have you tried removing the keyboard from the list of midi devices and then add it again ? And then maybe re-setup with your DAW ?

  • Jorge H C
    Jorge H C Member Posts: 11 Member

    Hi!
    I had the same problem with the previous update and now again, it's a real pain.

    They solved it by sending me an .app to check some files and changing the disk access, but this time it doesn't work for me and I have the same problem as you.

    I hope we find the solution soon.

  • Jorge H C
    Jorge H C Member Posts: 11 Member
    Answer ✓

    I founded
    I found when updating to Sequoia that Apple now requires many apps and processes to be added to the Local Network for them to function correctly and this seems to include NIHostIntegrationAgent as well as most DAWS, and things like iLok. (It did also ask me to add NTKDaemon but it looks like that is not required)

    So if anyone is having problems with NI hardware or Native Access on Sequoia you need to enable this and don't discuss the popup asking for local network access (at least for NIHostIntegrationAgent). Apps requiring access should initiate a system popup asking for access, however it seems MacOs only adds items to the panel below when they attempt to access the local network, so if they are not doing that you won't get the popup. Once they have asked to be added though they appear in that panel and then you can then toggle the on/off switch.

  • Chris2025
    Chris2025 Member Posts: 6 Member

    thank you for the answer !

    But it not really solved my problem anyhow.

  • Chris2025
    Chris2025 Member Posts: 6 Member
    Answer ✓

    Okay now it is solved.

    I also allowed

    the NTK Daemon access to the hard drive. After installing the Controller setup for the MK2 S 49 - everything works like before !!!

    Bildschirmfoto 2025-04-13 um 14.10.39.png

    Thank you all for finding the way to fix this problem!

  • Kymeia
    Kymeia NKS User Library Mod Posts: 5,621 mod
    edited April 14
    https://community.native-instruments.com/discussion/comment/221468#Comment_221468

    Full post here for context

    https://community.native-instruments.com/discussion/39436/tip-sequoia-adds-an-extra-step-when-installing-ni-hardware-keyboards-or-maschine-and-native-access
Back To Top

Categories