What is in the Kontrol-S Mk3 Firmware 1.9.4 update?

LarryB
LarryB Member Posts: 4 Member
in Komplete Kontrol

I'd love to know if there are new features or bug fixes or both. Thanks.

Best Answer

  • Matthew_NI
    Matthew_NI Product Team Posts: 1,834 mod
    Answer ✓

    Includes:

    • Onboard Arpeggiator: The Play Assist Arp functionality can now be used in "Keyboard Mode" for standalone operation directly on the Kontrol S Mk3, in addition to the existing "Plugin Mode" which required a connection to the Komplete Kontrol software
    • Tempo configuration: The shift + tempo button combination opens a new page which sets the tempo used by the arpeggiator. Note: the value set here may be overwritten by the Komplete Kontrol / Kontakt 8 / Maschine 3.1 plugins if the DAW tempo changes, so you may need to set the tempo in your DAW as well. This process will be optimized in a future release
    • Arp shortcut customization: This now works as in Komplete Kontrol
    • Advanced MIDI output routing: MIDI can now be sent to either MIDI DIN, MIDI USB, or both simultaneously. Simultaneous MIDI output can be enabled globally in the device settings, with additional configuration options available for MIDI mode only in the MIDI template settings
    • Maschine 3.1 support: User chords defined in the Maschine 3.1 software can now be accessed from the Kontrol S Mk3. Undo / redo / quantize can also now be controlled

    For reference, the release notes are available in Native Access 2, under NI Hardware Connection Service (I know, may not be intuitive… we need to fix that)

Answers

  • Matthew_NI
    Matthew_NI Product Team Posts: 1,834 mod
    Answer ✓

    Includes:

    • Onboard Arpeggiator: The Play Assist Arp functionality can now be used in "Keyboard Mode" for standalone operation directly on the Kontrol S Mk3, in addition to the existing "Plugin Mode" which required a connection to the Komplete Kontrol software
    • Tempo configuration: The shift + tempo button combination opens a new page which sets the tempo used by the arpeggiator. Note: the value set here may be overwritten by the Komplete Kontrol / Kontakt 8 / Maschine 3.1 plugins if the DAW tempo changes, so you may need to set the tempo in your DAW as well. This process will be optimized in a future release
    • Arp shortcut customization: This now works as in Komplete Kontrol
    • Advanced MIDI output routing: MIDI can now be sent to either MIDI DIN, MIDI USB, or both simultaneously. Simultaneous MIDI output can be enabled globally in the device settings, with additional configuration options available for MIDI mode only in the MIDI template settings
    • Maschine 3.1 support: User chords defined in the Maschine 3.1 software can now be accessed from the Kontrol S Mk3. Undo / redo / quantize can also now be controlled

    For reference, the release notes are available in Native Access 2, under NI Hardware Connection Service (I know, may not be intuitive… we need to fix that)

  • Skijumptoes
    Skijumptoes Member Posts: 151 Advisor
    edited March 20

    Got to say, what an incredible update this is. Thank you for the work and beta testers that helped along the way.

    It's transformed my setup and breathed new life into an old Korg Triton & Roland module that I have sitting here. Being able to swap templates and the MIDI port and channel changes at the same time is simply brilliant, especially if you have an image for that template as it's immediately obvious what you're controlling.

    I wasn't too fussed about the on-device Arp, and overlooked it, but it's really fun to play with on an external synth, I love the inversion options, it's really so much fun! Add in scale modes and honestly, it feels quite revolutionary for me.

    The ARP Tempo (BPM) seems to be bang on too, it stayed in sync with Cubase for 5+ mins when I tried it, I have some devices that can deviate a bit after a few minutes when being used standalone.

    Something else that I wasn't aware of is that you can route MIDI from the DAW via the USB connection on the Kontrol hardware and out of the MIDI DIN port by selecting 'Kontrol EXT' as a destination. Meaning I can get direct control, or DAW routed control via the same connection.

    Very happy :)

  • GiacoSoundStudio
    GiacoSoundStudio Member Posts: 1 Newcomer

    Grazie per questo ultimo aggiornamento incredibile avete fatto un lavoro straordinario.

    Native instruments 🎶grazie di cuore

  • Thomba
    Thomba Member Posts: 29 Member

    Is there anyone that has not received its firmware? My KSMK3 is constantly telling me, that no newer firmware is available? A direct download link does not exist?

    Thanks

  • PoorFellow
    PoorFellow Moderator Posts: 7,342 mod
    https://community.native-instruments.com/discussion/comment/223806#Comment_223806

    I don't know if your situation is exactly the same , but I found this :

    Quote Matthew_NI : The steps to resolve would be as follows:

    (The message on the screen includes the necessary URL that you should use to obtain the firmware.)

    Go to the URL provided

    1. Download the latest firmware
    2. Install the latest firmware

    You can also Skip the message at anytime by pressing the button in the top right, although you may not have access to all features without the latest versions.

Back To Top

Categories