I have a solution to your problem... and the problems of many other people! This is a solution with the addition of channels in S1
- You need to open a clean Kontakt and open the "Outputs" panel -> click on the PLUS button to add channels near the "Outputs" label on the Output panel.
- Next, in the "Quantity" field, specify the desired channel value (for e.g. 16)
- Leave the "Number of channels" value at 2
- "Host Output" select KT St.1 [1]
- "Delete existing channels before creating new ones" check the box
- Click OK
Congratulations, you've created additional channels!
BUT THAT'S NOT ALL... - Click the "Presets/Batch Configuration" button and save the preset just in case.
- Just in case, save the multi preset in Kontakt "Files" -> "Save as default multi"
- Save the preset in Studio One: Click on the sheet icon near the preset selection in the upper toolbar of the tool -> Store as Default Preset
And that's not all... - Completely delete the track along with the instrument: to do this, click on the track -> Remove Track and Instrumental
- Open a new Kontakt and select "Port Setup" in the upper toolbar (it's to the right of the preset selection, it looks something like this - [ |-> ] and select the outputs you need
You can see that you have created new tracks in the mixer. - Add the necessary instruments to Kontakt and assign the necessary Output and Midi Channel to each instrument.
- And now you can create duplicate tracks (not complete) with Kontakt -> next, select a different Event Input on each track (1,2,3, etc.)
Now I definitely congratulate you, you did it! Use and discover the endless scope to create a unique sound in your Kontakt. All you had to do was and dig in there for 2.5 hours.
!!!All the points are mandatory, and then the horse will work properly!!!