T4 traktor audio 10 problem..

Bulyáki László · 2024-07-21T04:31:52+00:00

There was an error rendering this rich post.

Hello. I installed T4 on an HP Elitebook 8570w and an 8770w machine. Both machines are equipped with an i7 3740qm processor, and the 8570 works with 16GB ram and the 8770 with 32GB ram. The following is the error: when T4 starts and I use all 4 players, - "but if I use only the four, it doesn't work either" - no sound comes out on the four channel - no noise, no sound - nothing. The sound card works perfectly with the T3, the output and input of all four channels also work perfectly. The T4 4 player starts the music, but there is no sound. There is no sound when e.g. I try with F1.. Channel 4 is completely "blind" ..... neither its output nor its input works for the sound card. Please help me.

Find more posts tagged with

Comments

lord-carlos

It's a known bug and they are working on a hot fix.

Use tp3 for now or assign channel 0,1 to deck a, 2,3 to deck b.. Etc.

Bulyáki László

Well, then I was reassured that the problem was not with my machine. And you don't need to reinstall unnecessarily. However, then it is likely that this is also why the software lags noticeably during any sampling. In any case, it would be good if this problem were solved as soon as possible... I discovered the error before a party last night. Of course, I should have tested the software myself first... but I also learned from this...

lord-carlos

Also read the "Known issues" section of the release note when upgrading a product :)

Sûlherokhh

For your convenience:

https://support.native-instruments.com/hc/en-us/articles/360017233958-What-s-New-in-Traktor-Pro-4

Scroll down to 'Known issues'.

maniacintosh81

But Traktor Audio 10 has only 10 channels not more than 12. It shouldn't be affected by this bug/known issue.

Bulyáki László

Of course there can be mistakes... I accept that. Only those who don't work are not at fault... :) However, the solution is also not satisfactory, that I temporarily set the output of the D deck to 0 and 1 main... because it will sound like that, but the main input cannot be adjusted for phono...

Bulyáki László

I don't think this whole thing got off to a good start. Why do the main output and input have to be 0 and 1?

lord-carlos

As a temporary workaround until they fix it. At least the outputs. I don't know if the inputs have to as well.

Or you use tp3.

Bulyáki László

Now there is no other option, so the use of T3 plus remains. I hope this problem is solved as soon as possible.

Native Instruments Traktor Audio 10, Audio4DJ, Audio8DJ, Stanton Finalscratch Open2, Maya44 USB, Traktor X1, Traktor F1, Zomo MC1000, Technics SL1210 MK2, Pioneer DJM600, Outline Pro405.

Bulyáki László

A10 problem solved with 4.01 update.... Thanks for the quick fix.. :)

Quick links

Unanswered questions