Komplete Kontrol S88 Mk II pumps out Expression control change messages on reboot!

cropotkin
cropotkin Member Posts: 4 Member
edited October 2024 in Komplete Kontrol

When I reboot my computer and run Midi-OX I see that my Komplete Kontrol S88 Mk II is continually pumping out Expression control change messages. I do have an Expression pedal connected to the keyboard, but I know that it is not changing position, because, by
starting the Komplete Kontrol app and turning the keyboard off and on, the control change messages stop, and my Expression and Volume pedals respond in the expected way. I have my Expression pedal and Volume pedal set up in the default profile. Is there any way of fixing this behaviour?

Best Answer

  • cropotkin
    cropotkin Member Posts: 4 Member
    Answer ✓

    Hi Jeremy, sorry for the confusion. I realise that comes from my error in the question. Thankfully your question has caused me to fiddle around a whole lot more and get everything working. Partly fixed by changing the pedals around, and partly fixed by changing a BIOS setting to delay power to the USB port until later in the boot process.

Answers

  • cropotkin
    cropotkin Member Posts: 4 Member

    Sorry, I meant Sustain Pedal, not Expression Pedal

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 13,187 mod

    Ok, I'm a little confused here, so you have 2 expression pedals, one set to expression (cc11) and one to volume (cc7)? Then you mention sustain, can you clarify? What models are these pedals? What's your operating system? Can you share the MIDI Ox readings?

  • cropotkin
    cropotkin Member Posts: 4 Member
    Answer ✓

    Hi Jeremy, sorry for the confusion. I realise that comes from my error in the question. Thankfully your question has caused me to fiddle around a whole lot more and get everything working. Partly fixed by changing the pedals around, and partly fixed by changing a BIOS setting to delay power to the USB port until later in the boot process.

  • Jeremy_NI
    Jeremy_NI Customer Care Posts: 13,187 mod
    https://community.native-instruments.com/discussion/comment/164083#Comment_164083

    Great! Happy that it's all working now.

This discussion has been closed.
Back To Top

Categories