Maschine plus sampler routing

AndreasS
AndreasS Member Posts: 2 Member
in Maschine

Hi,

Can anyone help me with a routing question in Maschine plus.

I'm using it to live sample several instruments.

I'm choosing the input source in the sampler. To hear the click separately on the headphones I've set Channel>Master>output>Cue output to Ext.2. The Audio output on the same page is set to Ext.1

In the sampler I'm setting Monitor to on but the Instrument that is connected to the input is only hearable on the headphones, not on the line out. Does anyone know why and how to set it up correctly?

The second question would be what the Channel>Sound>Input>Audio Source selection is used for. If there's none selected the samples still gets and input so it seams to make no difference.

Thank you for any advice!

Tagged:

Comments

  • Psyearth5
    Psyearth5 Member Posts: 404 Member

    It will be on speaker's too when you turn off CUE and that is happening in between making changes and turning CUE on.

    That input can be routed to input on the same or different Channel. Go to input of the sound and choose LR o if it's mono choose and you have 10 db for gain that input signal.

    If you already have a sound on that channel then probably that's why input sound don't come out.

    I use both MIDI and Audio routing but I didn't notice any problem and I remember I read about it in the Manual. Easy to find.

    I wish you success.

Back To Top

Categories