S49 MK2 controlling Moog Mother32 ?

TearOfLead

Hello, Is it possible to control the moog mother mother 32 with the Komplete s49 MK2.

I configured the midi channel 1 of the mother32 and connected a midi in cable from the m32 to midi out of the S49 but nothing…

When I use a keystep it's work directly.

Thanks in advance for your help!

PoorFellow

https://community.native-instruments.com/discussion/37588/s49-mk2-controlling-moog-mother32

For starters then you might want to make sure that the Midi channel on the S49 MK2 keyboard is set to channel 1 ?

Manual page 86 : 8.3. Using the Keyboard in MIDI Mode

Managing KOMPLETE KONTROL MK2 MIDI Templates

Moog Mother 32 manual page 7

How to Connect MIDI to Moog Mother-32 with Arturia Keystep (sorry not a video for the Komplete Kontrol)

Sometimes also the problem can be the midi cable so you might want to check that also.

Also please notice that the 5 pin midi port on the S49 Mk2 , as far as I know , is not active while using it as a USB controller , as far as I know then it is either or (either you can use the USB or the Midi 5 pin port but not both at the same time) ,

Quote the manual page 67 : 8.4. Using the Keyboard as Stand-Alone MIDI Controller :
If you power up the KOMPLETE KONTROL keyboard without a USB connection (while the power
supply is connected), you can use it as a stand-alone MIDI controller by connecting MIDI devices
to the 5-pin DIN MIDI sockets on the keyboard’s rear panel