Polarity of sustain pedal is inverted

Eric Flarez

Hi!

I have a Yamaha FC3 connected to my S88 MK3 and I have the following issue:

The polarity is reversed. In other words, when I press the pedal down the MIDI values go down to 0, and when I lift, they go back up to 127. Now, I've tried the typical tricks such as booting the keyboard back up with the pedal pressed down or using the "invert" function in the keyboard's menu, but both of these have not helped.

Does anyone know how to fix this?

Uwe303

Hello,

this is a continuous controller pedal, so you set mode to continuous, try to calibrate it, start with not pressed pedal then press it if the keyboard says so. If you have done this already then i don´t know, normally pedals have a polarity switch. I have a pedal with a polarity switch, i can try to set it the "wrong" way and try if i get it to work somehow with the mk3 - then report back

P.S. have you tried to set swap to tip, that should solve the issue

Jeremy_NI

https://community.native-instruments.com/discussion/37487/polarity-of-sustain-pedal-is-inverted

Have you tried to do the calibration in reverse? How to Configure Sustain / Expression Pedals on Kontrol Keyboards