CH1 gain knob toggles play/pause on CH2 - Mixars Quattro

stupidpiscesguy
stupidpiscesguy Member Posts: 8 Member
edited October 2024 in Mapping Traktor

I have a Quattro that I mapped myself for Traktor several years ago with out any problems. The mapping is available for download on djtechtools.com. However, suddenly in the last month or so when I adjust the gain on channel 1 it quickly cycles between playing/pausing channel 2. I have double checked that is nothing mapped to that knob and nothing else on the mixer is acting out of sync. I've updated the drivers for the mixer and made sure traktor itself is up to date and still the problem persists. It's really weird and out of nowhere, can anyone help?

Answers

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    I'd inspect the signal with a monitor such as Midi Pipe or MIDI-OX. If hardware is indeed acting up then you will see that reflected in the software.

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member

    Installed MIDI-OX, I have no idea what I'm looking at here or how to use this program. Do you mind elaborating a little bit on how this can help me?

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    No problem. First you need to enable your controller ports at Output and Input, but make sure to close all oter midi cappable applications before starting MIDI-OX if you have Windows OS installed on your computer.

    Inside MIDI-OX, open the log window and turn the problematic knob on the hardware.

    Inspect the messages and see if your controller is sending multiple CC numbers at once. That would explain why is other control also affected by turning the Gain knob.

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    Found the source of the issue yet?

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member

    I tried all the gain knobs and they all show the same CC number (CC: 22).

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod
    https://community.native-instruments.com/discussion/comment/139645#Comment_139645

    It is likely that same CC.22 is sent on a four different midi channels. This looks like a mapping issue after all.

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member

    I see. Well then I'm at a loss because I don't know how to unattach that control from the knob itself.

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    Do you use All Ports setting? Perhaps you have other mappings and some of it are using CC.22 to control the play/pause.

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member

    Do I need to use all ports or change it to the mixer?

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member
    edited March 2024

    Alright, so looking around and looking for "cc.22" I realized there was a "generic midi" mapping which had a random group of about 15 controls, one of which was causing the problem. Thank you for steering me in the right direction!

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    Alright! Glad to hear that you were able to resolve it. Quatro is an interesting unit, always wanted to check it out since I come from Kontrol Z2.

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member

    It seems the Mixar brand is dead as far as I can tell but I absolutely love this mixer. I wish there were other 4 channels with midi controls.

  • Stevan
    Stevan Traktor Mapping Mod Posts: 2,130 mod

    Yes they are, ant they were never interested in making a TSI for this unit hence Serato integration.

  • stupidpiscesguy
    stupidpiscesguy Member Posts: 8 Member

    Ive made a pretty through mapping myself so if you ever pick one up, then the work is done

This discussion has been closed.
Back To Top

Categories