Can't make the Komplete Kontrol A61 work with Cubase 13

Beauhanister · 2023-11-19T19:08:46+00:00

There was an error rendering this rich post.

I have a new A61 and i have just installed Cubase 13. Try as I might I can't get the keyboard to operate. No midi signal showing on the track, no sound. I've followed all the procedures = studio select midi controller etc. It works in Reaper. I don't know what on earth I'm doing wrong, I am a newbie, so.....

I'd be so grateful if somebody could shine a light, lovely new set up and I can't use it.

Thank Your for your time. Gav

Find more posts tagged with

Accepted answers

Uwe303

Your midi port setup (second picture) is wrong, you have to use the non DAW ports there. Please look again closely at my picture you can easily overlook that detail. You need to activate the first midi port and disable there all the ports with DAW in the name.

All comments

Uwe303

Hello,

have you set it up like you see here in the picture under studio settings?

and set no midi filter under "program settings - midi - midi filter"

Beauhanister

Thank you for your response. Komplete Kontrol is not working on it's own even as standalone. I've been all over youtube It looks like a great machine, difference being with mine is that it's not reliable, not even as plug and play midi keyboard. As I said thank You for your time Uwe

PoorFellow

Sounds as if the keyboard has not been properly recognized by your OS : My Native Instruments Hardware Device is Not Recognized : https://support.native-instruments.com/hc/en-us/articles/4410096148113

Jeremy_NI

@Beauhanister First you need to install Komplete Kontrol, as well as Kontakt Player, Reaktor and all the products you wish in Native Access.

Then try to open Komplete Kontrol in standalone. Does it open or not? If not, what's happening?

If it's opening, then go to Preferences -> MIDI, make sure to select the A keyboard as input and output, as well as the A DAW port.

If you are not able to do the above, try these steps: My KOMPLETE KONTROL Keyboard Does Not Start

Now open Cubase, are you able to load the Komplete Kontrol plug-in?

Beauhanister

I don't know what to say, I have bee very foolish. Iwas so obsessed with the new cubase I ignored other programmes as tests. As a midi keyboard it works perfectly in Ableton, Cakewalk and reaper. I became fixated on Cubase - where i'm still at a loss - However it's obvious that your product is working as it should. You can, I'm sure, imagine how stupid I feel. So I'll have to jump over to steinberg forums.

Talk about eating crow, well that's all my fault. Again my sincere apologies.

Jeremy_NI

@Beauhanister No need to feel stupid, we also appreciate the fact you apologised, even if you did not break any rule here or insukt anyone. We can still help for Cubase. Are you running it as admin? How to Run a Program as an Administrator

Does it show at all in your Studio settings, like @Uwe303 showed? Can you share a screenshot of your preferences there?

Beauhanister

Hi NI, thank you for your continued help, done a little reading and to the best of my ability Updated every driver connected to Native I. there was one process turned off - I can't remember which one it was - I turned it on(?). seems to work fine in the other DAWs, though IO don't really us them. But cubase - which is

Cubase 1.png

Cubase 2.png

Cubase 3.png

a fresh install - still continues to baffle, though it's true to say it;s been YEARS since I was last into it. I don't know whether these screen shots will help or not

Uwe303

Beauhanister

Like this;

Cubase 4.png

I get sound from virtual ,Kontact keyboard. But no response from Komplete Kontrol Keyboard, no midi signal no sound.

Uwe303

Almost done you also have to switch the "all midi" setting to the other port and it should work. This setting is an auto focus thing, every midi device you activate there will be automatically routed to a selected channel if it's too set to "all midi in" instead of a certain device, so this is also important but by default it's set correctly in the tracks

Beauhanister

Excellent, Thank you so much for your time and patience.

Uwe303

No problem, you are welcome

Beauhanister

Hi NI, I cannot browse instruments in cubase using Komplete. I have been reading the manual as well as looking for you tube vids. I just cannot get the browser to light up. Have I made a mistake somewhere with the Cubase set up - that did take me a long time to understand. All the Play/Stop etc. seems fine. Help appreciated.

Uwe303

Normally if you select a track with komplete kontrol or kontakt loaded you just press the browse button. You just have to load an instance of kk or komplete 7 beforehand.

Beauhanister

OK Uwe, thank you for your reply.

Quick links

Unanswered questions