Default MIDI input response Komplete Kontrol/Maschine/...

Wouter De Muynck
Wouter De Muynck Member Posts: 249 Pro
edited October 2024 in Komplete Kontrol

Hello,

I'm using an external MIDI foot controller with 2 expression pedals connected to it to be able to control the parameters of NI instruments. I'm using Midi channel 1 - CC number 10 and 11 at the moment to achieve that. In combination I'm loading Ashlight in Komplete Kontrol and I'm using Learn-mode in the Global section to assign an expression pedal to the X and Y axis of Ashlight. This is all working, but the expression pedals also control the volume (cc number 7) or panning (cc number 10). So I was wandering where I can find an overview of the default MIDI settings to which Komplete Kontrol is responding, and maybe other NI products (?).

Thanks,

Wouter

Best Answer

Answers

  • Uwe303
    Uwe303 Moderator Posts: 4,606 mod
    edited July 2023 Answer ✓

    Hello,

    have you tried to give the pedals another cc number, lets say 14,15 or 20 to 31, those cc´s are not defined in the standard midi implementation, so they should not collide with other stuff.

    MIDI CC List (Continuous Controllers) | Another Producer

  • Wouter De Muynck
    Wouter De Muynck Member Posts: 249 Pro

    @Uwe303 , thanks for the reply and the link! I will have look and see what's happening when I change the cc values to non defined values.

    Keep you posted,

    Wouter

  • Wouter De Muynck
    Wouter De Muynck Member Posts: 249 Pro

    @Uwe303 , works like a charm! Apparently I can add multiple cc values to the same expression pedal, so I can combine pre-defined and free cc values to the same pedal or combine the X and Y also into 1 pedal. The list was indeed very helpful, thanks for that! I added a bookmark 😊

    Grtz,

    Wouter

This discussion has been closed.
Back To Top

Categories